/* [<][>][^][v][top][bottom][index][help] */
DEFINITIONS
This source file includes following definitions.
- cpufreq_p4_setdc
- cpufreq_p4_target
- cpufreq_p4_verify
- cpufreq_p4_get_frequency
- cpufreq_p4_cpu_init
- cpufreq_p4_cpu_exit
- cpufreq_p4_get
- cpufreq_p4_init
- cpufreq_p4_exit
/*
* Pentium 4/Xeon CPU on demand clock modulation/speed scaling
* (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
* (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com>
* (C) 2002 Arjan van de Ven <arjanv@redhat.com>
* (C) 2002 Tora T. Engstad
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* The author(s) of this software shall not be held liable for damages
* of any nature resulting due to the use of this software. This
* software is provided AS-IS with no warranties.
*
* Date Errata Description
* 20020525 N44, O17 12.5% or 25% DC causes lockup
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/cpumask.h>
#include <asm/processor.h>
#include <asm/msr.h>
#include <asm/timex.h>
#include "speedstep-lib.h"
#define PFX "p4-clockmod: "
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg)
/*
* Duty Cycle (3bits), note DC_DISABLE is not specified in
* intel docs i just use it to mean disable
*/
enum {
DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT,
DC_64PT, DC_75PT, DC_88PT, DC_DISABLE
};
#define DC_ENTRIES 8
static int has_N44_O17_errata[NR_CPUS];
static unsigned int stock_freq;
static struct cpufreq_driver p4clockmod_driver;
static unsigned int cpufreq_p4_get(unsigned int cpu);
static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
{
u32 l, h;
if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV))
return -EINVAL;
rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
if (l & 0x01)
dprintk("CPU#%d currently thermal throttled\n", cpu);
if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
newstate = DC_38PT;
rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
if (newstate == DC_DISABLE) {
dprintk("CPU#%d disabling modulation\n", cpu);
wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
} else {
dprintk("CPU#%d setting duty cycle to %d%%\n",
cpu, ((125 * newstate) / 10));
/* bits 63 - 5 : reserved
* bit 4 : enable/disable
* bits 3-1 : duty cycle
* bit 0 : reserved
*/
l = (l & ~14);
l = l | (1<<4) | ((newstate & 0x7)<<1);
wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h);
}
return 0;
}
static struct cpufreq_frequency_table p4clockmod_table[] = {
{DC_RESV, CPUFREQ_ENTRY_INVALID},
{DC_DFLT, 0},
{DC_25PT, 0},
{DC_38PT, 0},
{DC_50PT, 0},
{DC_64PT, 0},
{DC_75PT, 0},
{DC_88PT, 0},
{DC_DISABLE, 0},
{DC_RESV, CPUFREQ_TABLE_END},
};
static int cpufreq_p4_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
unsigned int newstate = DC_RESV;
struct cpufreq_freqs freqs;
int i;
if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate))
return -EINVAL;
freqs.old = cpufreq_p4_get(policy->cpu);
freqs.new = stock_freq * p4clockmod_table[newstate].index / 8;
if (freqs.new == freqs.old)
return 0;
/* notifiers */
for_each_cpu_mask_nr(i, policy->cpus) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
* Developer's Manual, Volume 3
*/
for_each_cpu_mask_nr(i, policy->cpus)
cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
/* notifiers */
for_each_cpu_mask_nr(i, policy->cpus) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
return 0;
}
static int cpufreq_p4_verify(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]);
}
static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
{
if (c->x86 == 0x06) {
if (cpu_has(c, X86_FEATURE_EST))
printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. "
"The acpi-cpufreq module offers voltage scaling"
" in addition of frequency scaling. You should use "
"that instead of p4-clockmod, if possible.\n");
switch (c->x86_model) {
case 0x0E: /* Core */
case 0x0F: /* Core Duo */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE);
case 0x0D: /* Pentium M (Dothan) */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
/* fall through */
case 0x09: /* Pentium M (Banias) */
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
}
}
if (c->x86 != 0xF) {
printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@vger.kernel.org>\n");
return 0;
}
/* on P-4s, the TSC runs with constant frequency independent whether
* throttling is active or not. */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) {
printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
"The speedstep-ich or acpi cpufreq modules offer "
"voltage scaling in addition of frequency scaling. "
"You should use either one instead of p4-clockmod, "
"if possible.\n");
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M);
}
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D);
}
static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
int cpuid = 0;
unsigned int i;
#ifdef CONFIG_SMP
policy->cpus = per_cpu(cpu_sibling_map, policy->cpu);
#endif
/* Errata workaround */
cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask;
switch (cpuid) {
case 0x0f07:
case 0x0f0a:
case 0x0f11:
case 0x0f12:
has_N44_O17_errata[policy->cpu] = 1;
dprintk("has errata -- disabling low frequencies\n");
}
/* get max frequency */
stock_freq = cpufreq_p4_get_frequency(c);
if (!stock_freq)
return -EINVAL;
/* table init */
for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
if ((i<2) && (has_N44_O17_errata[policy->cpu]))
p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
else
p4clockmod_table[i].frequency = (stock_freq * i)/8;
}
cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
/* cpuinfo and default policy values */
policy->cpuinfo.transition_latency = 1000000; /* assumed */
policy->cur = stock_freq;
return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]);
}
static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
return 0;
}
static unsigned int cpufreq_p4_get(unsigned int cpu)
{
u32 l, h;
rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
if (l & 0x10) {
l = l >> 1;
l &= 0x7;
} else
l = DC_DISABLE;
if (l != DC_DISABLE)
return (stock_freq * l / 8);
return stock_freq;
}
static struct freq_attr* p4clockmod_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver p4clockmod_driver = {
.verify = cpufreq_p4_verify,
.target = cpufreq_p4_target,
.init = cpufreq_p4_cpu_init,
.exit = cpufreq_p4_cpu_exit,
.get = cpufreq_p4_get,
.name = "p4-clockmod",
.owner = THIS_MODULE,
.attr = p4clockmod_attr,
};
static int __init cpufreq_p4_init(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
int ret;
/*
* THERM_CONTROL is architectural for IA32 now, so
* we can rely on the capability checks
*/
if (c->x86_vendor != X86_VENDOR_INTEL)
return -ENODEV;
if (!test_cpu_cap(c, X86_FEATURE_ACPI) ||
!test_cpu_cap(c, X86_FEATURE_ACC))
return -ENODEV;
ret = cpufreq_register_driver(&p4clockmod_driver);
if (!ret)
printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
return (ret);
}
static void __exit cpufreq_p4_exit(void)
{
cpufreq_unregister_driver(&p4clockmod_driver);
}
MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>");
MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
MODULE_LICENSE ("GPL");
late_initcall(cpufreq_p4_init);
module_exit(cpufreq_p4_exit);