[funini.com] -> [kei@sodan] -> Kernel Reading

root/arch/x86/kernel/cpu/cpufreq/powernow-k7.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. check_fsb
  2. check_powernow
  3. get_ranges
  4. change_FID
  5. change_VID
  6. change_speed
  7. powernow_acpi_init
  8. powernow_acpi_init
  9. powernow_decode_bios
  10. powernow_target
  11. powernow_verify
  12. fixup_sgtc
  13. powernow_get
  14. acer_cpufreq_pst
  15. powernow_cpu_init
  16. powernow_cpu_exit
  17. powernow_init
  18. powernow_exit

/*
 *  AMD K7 Powernow driver.
 *  (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs.
 *  (C) 2003-2004 Dave Jones <davej@redhat.com>
 *
 *  Licensed under the terms of the GNU GPL License version 2.
 *  Based upon datasheets & sample CPUs kindly provided by AMD.
 *
 * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt.
 * - We cli/sti on stepping A0 CPUs around the FID/VID transition.
 * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect.
 * - We disable half multipliers if ACPI is used on A0 stepping CPUs.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/dmi.h>

#include <asm/msr.h>
#include <asm/timer.h>
#include <asm/timex.h>
#include <asm/io.h>
#include <asm/system.h>

#ifdef CONFIG_X86_POWERNOW_K7_ACPI
#include <linux/acpi.h>
#include <acpi/processor.h>
#endif

#include "powernow-k7.h"

#define PFX "powernow: "


struct psb_s {
        u8 signature[10];
        u8 tableversion;
        u8 flags;
        u16 settlingtime;
        u8 reserved1;
        u8 numpst;
};

struct pst_s {
        u32 cpuid;
        u8 fsbspeed;
        u8 maxfid;
        u8 startvid;
        u8 numpstates;
};

#ifdef CONFIG_X86_POWERNOW_K7_ACPI
union powernow_acpi_control_t {
        struct {
                unsigned long fid:5,
                vid:5,
                sgtc:20,
                res1:2;
        } bits;
        unsigned long val;
};
#endif

#ifdef CONFIG_CPU_FREQ_DEBUG
/* divide by 1000 to get VCore voltage in V. */
static const int mobile_vid_table[32] = {
    2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
    1600, 1550, 1500, 1450, 1400, 1350, 1300, 0,
    1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
    1075, 1050, 1025, 1000, 975, 950, 925, 0,
};
#endif

/* divide by 10 to get FID. */
static const int fid_codes[32] = {
    110, 115, 120, 125, 50, 55, 60, 65,
    70, 75, 80, 85, 90, 95, 100, 105,
    30, 190, 40, 200, 130, 135, 140, 210,
    150, 225, 160, 165, 170, 180, -1, -1,
};

/* This parameter is used in order to force ACPI instead of legacy method for
 * configuration purpose.
 */

static int acpi_force;

static struct cpufreq_frequency_table *powernow_table;

static unsigned int can_scale_bus;
static unsigned int can_scale_vid;
static unsigned int minimum_speed=-1;
static unsigned int maximum_speed;
static unsigned int number_scales;
static unsigned int fsb;
static unsigned int latency;
static char have_a0;

#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg)

static int check_fsb(unsigned int fsbspeed)
{
        int delta;
        unsigned int f = fsb / 1000;

        delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed;
        return (delta < 5);
}

static int check_powernow(void)
{
        struct cpuinfo_x86 *c = &cpu_data(0);
        unsigned int maxei, eax, ebx, ecx, edx;

        if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) {
#ifdef MODULE
                printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n");
#endif
                return 0;
        }

        /* Get maximum capabilities */
        maxei = cpuid_eax (0x80000000);
        if (maxei < 0x80000007) {       /* Any powernow info ? */
#ifdef MODULE
                printk (KERN_INFO PFX "No powernow capabilities detected\n");
#endif
                return 0;
        }

        if ((c->x86_model == 6) && (c->x86_mask == 0)) {
                printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n");
                have_a0 = 1;
        }

        cpuid(0x80000007, &eax, &ebx, &ecx, &edx);

        /* Check we can actually do something before we say anything.*/
        if (!(edx & (1 << 1 | 1 << 2)))
                return 0;

        printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");

        if (edx & 1 << 1) {
                printk ("frequency");
                can_scale_bus=1;
        }

        if ((edx & (1 << 1 | 1 << 2)) == 0x6)
                printk (" and ");

        if (edx & 1 << 2) {
                printk ("voltage");
                can_scale_vid=1;
        }

        printk (".\n");
        return 1;
}


static int get_ranges (unsigned char *pst)
{
        unsigned int j;
        unsigned int speed;
        u8 fid, vid;

        powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL);
        if (!powernow_table)
                return -ENOMEM;

        for (j=0 ; j < number_scales; j++) {
                fid = *pst++;

                powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
                powernow_table[j].index = fid; /* lower 8 bits */

                speed = powernow_table[j].frequency;

                if ((fid_codes[fid] % 10)==5) {
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
                        if (have_a0 == 1)
                                powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID;
#endif
                }

                if (speed < minimum_speed)
                        minimum_speed = speed;
                if (speed > maximum_speed)
                        maximum_speed = speed;

                vid = *pst++;
                powernow_table[j].index |= (vid << 8); /* upper 8 bits */

                dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
                         "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
                         fid_codes[fid] % 10, speed/1000, vid,
                         mobile_vid_table[vid]/1000,
                         mobile_vid_table[vid]%1000);
        }
        powernow_table[number_scales].frequency = CPUFREQ_TABLE_END;
        powernow_table[number_scales].index = 0;

        return 0;
}


static void change_FID(int fid)
{
        union msr_fidvidctl fidvidctl;

        rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
        if (fidvidctl.bits.FID != fid) {
                fidvidctl.bits.SGTC = latency;
                fidvidctl.bits.FID = fid;
                fidvidctl.bits.VIDC = 0;
                fidvidctl.bits.FIDC = 1;
                wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
        }
}


static void change_VID(int vid)
{
        union msr_fidvidctl fidvidctl;

        rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
        if (fidvidctl.bits.VID != vid) {
                fidvidctl.bits.SGTC = latency;
                fidvidctl.bits.VID = vid;
                fidvidctl.bits.FIDC = 0;
                fidvidctl.bits.VIDC = 1;
                wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
        }
}


static void change_speed (unsigned int index)
{
        u8 fid, vid;
        struct cpufreq_freqs freqs;
        union msr_fidvidstatus fidvidstatus;
        int cfid;

        /* fid are the lower 8 bits of the index we stored into
         * the cpufreq frequency table in powernow_decode_bios,
         * vid are the upper 8 bits.
         */

        fid = powernow_table[index].index & 0xFF;
        vid = (powernow_table[index].index & 0xFF00) >> 8;

        freqs.cpu = 0;

        rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
        cfid = fidvidstatus.bits.CFID;
        freqs.old = fsb * fid_codes[cfid] / 10;

        freqs.new = powernow_table[index].frequency;

        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);

        /* Now do the magic poking into the MSRs.  */

        if (have_a0 == 1)       /* A0 errata 5 */
                local_irq_disable();

        if (freqs.old > freqs.new) {
                /* Going down, so change FID first */
                change_FID(fid);
                change_VID(vid);
        } else {
                /* Going up, so change VID first */
                change_VID(vid);
                change_FID(fid);
        }


        if (have_a0 == 1)
                local_irq_enable();

        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}


#ifdef CONFIG_X86_POWERNOW_K7_ACPI

static struct acpi_processor_performance *acpi_processor_perf;

static int powernow_acpi_init(void)
{
        int i;
        int retval = 0;
        union powernow_acpi_control_t pc;

        if (acpi_processor_perf != NULL && powernow_table != NULL) {
                retval = -EINVAL;
                goto err0;
        }

        acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance),
                                      GFP_KERNEL);
        if (!acpi_processor_perf) {
                retval = -ENOMEM;
                goto err0;
        }

        if (acpi_processor_register_performance(acpi_processor_perf, 0)) {
                retval = -EIO;
                goto err1;
        }

        if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
                retval = -ENODEV;
                goto err2;
        }

        if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
                retval = -ENODEV;
                goto err2;
        }

        number_scales = acpi_processor_perf->state_count;

        if (number_scales < 2) {
                retval = -ENODEV;
                goto err2;
        }

        powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL);
        if (!powernow_table) {
                retval = -ENOMEM;
                goto err2;
        }

        pc.val = (unsigned long) acpi_processor_perf->states[0].control;
        for (i = 0; i < number_scales; i++) {
                u8 fid, vid;
                struct acpi_processor_px *state =
                        &acpi_processor_perf->states[i];
                unsigned int speed, speed_mhz;

                pc.val = (unsigned long) state->control;
                dprintk ("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
                         i,
                         (u32) state->core_frequency,
                         (u32) state->power,
                         (u32) state->transition_latency,
                         (u32) state->control,
                         pc.bits.sgtc);

                vid = pc.bits.vid;
                fid = pc.bits.fid;

                powernow_table[i].frequency = fsb * fid_codes[fid] / 10;
                powernow_table[i].index = fid; /* lower 8 bits */
                powernow_table[i].index |= (vid << 8); /* upper 8 bits */

                speed = powernow_table[i].frequency;
                speed_mhz = speed / 1000;

                /* processor_perflib will multiply the MHz value by 1000 to
                 * get a KHz value (e.g. 1266000). However, powernow-k7 works
                 * with true KHz values (e.g. 1266768). To ensure that all
                 * powernow frequencies are available, we must ensure that
                 * ACPI doesn't restrict them, so we round up the MHz value
                 * to ensure that perflib's computed KHz value is greater than
                 * or equal to powernow's KHz value.
                 */
                if (speed % 1000 > 0)
                        speed_mhz++;

                if ((fid_codes[fid] % 10)==5) {
                        if (have_a0 == 1)
                                powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
                }

                dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
                         "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
                         fid_codes[fid] % 10, speed_mhz, vid,
                         mobile_vid_table[vid]/1000,
                         mobile_vid_table[vid]%1000);

                if (state->core_frequency != speed_mhz) {
                        state->core_frequency = speed_mhz;
                        dprintk("   Corrected ACPI frequency to %d\n",
                                speed_mhz);
                }

                if (latency < pc.bits.sgtc)
                        latency = pc.bits.sgtc;

                if (speed < minimum_speed)
                        minimum_speed = speed;
                if (speed > maximum_speed)
                        maximum_speed = speed;
        }

        powernow_table[i].frequency = CPUFREQ_TABLE_END;
        powernow_table[i].index = 0;

        /* notify BIOS that we exist */
        acpi_processor_notify_smm(THIS_MODULE);

        return 0;

err2:
        acpi_processor_unregister_performance(acpi_processor_perf, 0);
err1:
        kfree(acpi_processor_perf);
err0:
        printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n");
        acpi_processor_perf = NULL;
        return retval;
}
#else
static int powernow_acpi_init(void)
{
        printk(KERN_INFO PFX "no support for ACPI processor found."
               "  Please recompile your kernel with ACPI processor\n");
        return -EINVAL;
}
#endif

static int powernow_decode_bios (int maxfid, int startvid)
{
        struct psb_s *psb;
        struct pst_s *pst;
        unsigned int i, j;
        unsigned char *p;
        unsigned int etuple;
        unsigned int ret;

        etuple = cpuid_eax(0x80000001);

        for (i=0xC0000; i < 0xffff0 ; i+=16) {

                p = phys_to_virt(i);

                if (memcmp(p, "AMDK7PNOW!",  10) == 0){
                        dprintk ("Found PSB header at %p\n", p);
                        psb = (struct psb_s *) p;
                        dprintk ("Table version: 0x%x\n", psb->tableversion);
                        if (psb->tableversion != 0x12) {
                                printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n");
                                return -ENODEV;
                        }

                        dprintk ("Flags: 0x%x\n", psb->flags);
                        if ((psb->flags & 1)==0) {
                                dprintk ("Mobile voltage regulator\n");
                        } else {
                                dprintk ("Desktop voltage regulator\n");
                        }

                        latency = psb->settlingtime;
                        if (latency < 100) {
                                printk(KERN_INFO PFX "BIOS set settling time to %d microseconds. "
                                                "Should be at least 100. Correcting.\n", latency);
                                latency = 100;
                        }
                        dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime);
                        dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst);

                        p += sizeof (struct psb_s);

                        pst = (struct pst_s *) p;

                        for (j=0; j<psb->numpst; j++) {
                                pst = (struct pst_s *) p;
                                number_scales = pst->numpstates;

                                if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) &&
                                    (maxfid==pst->maxfid) && (startvid==pst->startvid))
                                {
                                        dprintk ("PST:%d (@%p)\n", j, pst);
                                        dprintk (" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n",
                                                 pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);

                                        ret = get_ranges ((char *) pst + sizeof (struct pst_s));
                                        return ret;
                                } else {
                                        unsigned int k;
                                        p = (char *) pst + sizeof (struct pst_s);
                                        for (k=0; k<number_scales; k++)
                                                p+=2;
                                }
                        }
                        printk (KERN_INFO PFX "No PST tables match this cpuid (0x%x)\n", etuple);
                        printk (KERN_INFO PFX "This is indicative of a broken BIOS.\n");

                        return -EINVAL;
                }
                p++;
        }

        return -ENODEV;
}


static int powernow_target (struct cpufreq_policy *policy,
                            unsigned int target_freq,
                            unsigned int relation)
{
        unsigned int newstate;

        if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, relation, &newstate))
                return -EINVAL;

        change_speed(newstate);

        return 0;
}


static int powernow_verify (struct cpufreq_policy *policy)
{
        return cpufreq_frequency_table_verify(policy, powernow_table);
}

/*
 * We use the fact that the bus frequency is somehow
 * a multiple of 100000/3 khz, then we compute sgtc according
 * to this multiple.
 * That way, we match more how AMD thinks all of that work.
 * We will then get the same kind of behaviour already tested under
 * the "well-known" other OS.
 */
static int __init fixup_sgtc(void)
{
        unsigned int sgtc;
        unsigned int m;

        m = fsb / 3333;
        if ((m % 10) >= 5)
                m += 5;

        m /= 10;

        sgtc = 100 * m * latency;
        sgtc = sgtc / 3;
        if (sgtc > 0xfffff) {
                printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc);
                sgtc = 0xfffff;
        }
        return sgtc;
}

static unsigned int powernow_get(unsigned int cpu)
{
        union msr_fidvidstatus fidvidstatus;
        unsigned int cfid;

        if (cpu)
                return 0;
        rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
        cfid = fidvidstatus.bits.CFID;

        return (fsb * fid_codes[cfid] / 10);
}


static int __init acer_cpufreq_pst(const struct dmi_system_id *d)
{
        printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident);
        printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");
        printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n");
        return 0;
}

/*
 * Some Athlon laptops have really fucked PST tables.
 * A BIOS update is all that can save them.
 * Mention this, and disable cpufreq.
 */
static struct dmi_system_id __initdata powernow_dmi_table[] = {
        {
                .callback = acer_cpufreq_pst,
                .ident = "Acer Aspire",
                .matches = {
                        DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"),
                        DMI_MATCH(DMI_BIOS_VERSION, "3A71"),
                },
        },
        { }
};

static int __init powernow_cpu_init (struct cpufreq_policy *policy)
{
        union msr_fidvidstatus fidvidstatus;
        int result;

        if (policy->cpu != 0)
                return -ENODEV;

        rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);

        recalibrate_cpu_khz();

        fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
        if (!fsb) {
                printk(KERN_WARNING PFX "can not determine bus frequency\n");
                return -EINVAL;
        }
        dprintk("FSB: %3dMHz\n", fsb/1000);

        if (dmi_check_system(powernow_dmi_table) || acpi_force) {
                printk (KERN_INFO PFX "PSB/PST known to be broken.  Trying ACPI instead\n");
                result = powernow_acpi_init();
        } else {
                result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID);
                if (result) {
                        printk (KERN_INFO PFX "Trying ACPI perflib\n");
                        maximum_speed = 0;
                        minimum_speed = -1;
                        latency = 0;
                        result = powernow_acpi_init();
                        if (result) {
                                printk (KERN_INFO PFX "ACPI and legacy methods failed\n");
                                printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.html\n");
                        }
                } else {
                        /* SGTC use the bus clock as timer */
                        latency = fixup_sgtc();
                        printk(KERN_INFO PFX "SGTC: %d\n", latency);
                }
        }

        if (result)
                return result;

        printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
                                minimum_speed/1000, maximum_speed/1000);

        policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency);

        policy->cur = powernow_get(0);

        cpufreq_frequency_table_get_attr(powernow_table, policy->cpu);

        return cpufreq_frequency_table_cpuinfo(policy, powernow_table);
}

static int powernow_cpu_exit (struct cpufreq_policy *policy) {
        cpufreq_frequency_table_put_attr(policy->cpu);

#ifdef CONFIG_X86_POWERNOW_K7_ACPI
        if (acpi_processor_perf) {
                acpi_processor_unregister_performance(acpi_processor_perf, 0);
                kfree(acpi_processor_perf);
        }
#endif

        kfree(powernow_table);
        return 0;
}

static struct freq_attr* powernow_table_attr[] = {
        &cpufreq_freq_attr_scaling_available_freqs,
        NULL,
};

static struct cpufreq_driver powernow_driver = {
        .verify = powernow_verify,
        .target = powernow_target,
        .get    = powernow_get,
        .init   = powernow_cpu_init,
        .exit   = powernow_cpu_exit,
        .name   = "powernow-k7",
        .owner  = THIS_MODULE,
        .attr   = powernow_table_attr,
};

static int __init powernow_init (void)
{
        if (check_powernow()==0)
                return -ENODEV;
        return cpufreq_register_driver(&powernow_driver);
}


static void __exit powernow_exit (void)
{
        cpufreq_unregister_driver(&powernow_driver);
}

module_param(acpi_force,  int, 0444);
MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");

MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors.");
MODULE_LICENSE ("GPL");

late_initcall(powernow_init);
module_exit(powernow_exit);


/* [<][>][^][v][top][bottom][index][help] */

[funini.com] -> [kei@sodan] -> Kernel Reading