/* [<][>][^][v][top][bottom][index][help] */
DEFINITIONS
This source file includes following definitions.
- edsa_xmit
- edsa_rcv
- edsa_init_module
- edsa_cleanup_module
/*
* net/dsa/tag_edsa.c - Ethertype DSA tagging
* Copyright (c) 2008 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/etherdevice.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include "dsa_priv.h"
#define DSA_HLEN 4
#define EDSA_HLEN 8
int edsa_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
u8 *edsa_header;
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
/*
* Convert the outermost 802.1q tag to a DSA tag and prepend
* a DSA ethertype field is the packet is tagged, or insert
* a DSA ethertype plus DSA tag between the addresses and the
* current ethertype field if the packet is untagged.
*/
if (skb->protocol == htons(ETH_P_8021Q)) {
if (skb_cow_head(skb, DSA_HLEN) < 0)
goto out_free;
skb_push(skb, DSA_HLEN);
memmove(skb->data, skb->data + DSA_HLEN, 2 * ETH_ALEN);
/*
* Construct tagged FROM_CPU DSA tag from 802.1q tag.
*/
edsa_header = skb->data + 2 * ETH_ALEN;
edsa_header[0] = (ETH_P_EDSA >> 8) & 0xff;
edsa_header[1] = ETH_P_EDSA & 0xff;
edsa_header[2] = 0x00;
edsa_header[3] = 0x00;
edsa_header[4] = 0x60;
edsa_header[5] = p->port << 3;
/*
* Move CFI field from byte 6 to byte 5.
*/
if (edsa_header[6] & 0x10) {
edsa_header[5] |= 0x01;
edsa_header[6] &= ~0x10;
}
} else {
if (skb_cow_head(skb, EDSA_HLEN) < 0)
goto out_free;
skb_push(skb, EDSA_HLEN);
memmove(skb->data, skb->data + EDSA_HLEN, 2 * ETH_ALEN);
/*
* Construct untagged FROM_CPU DSA tag.
*/
edsa_header = skb->data + 2 * ETH_ALEN;
edsa_header[0] = (ETH_P_EDSA >> 8) & 0xff;
edsa_header[1] = ETH_P_EDSA & 0xff;
edsa_header[2] = 0x00;
edsa_header[3] = 0x00;
edsa_header[4] = 0x40;
edsa_header[5] = p->port << 3;
edsa_header[6] = 0x00;
edsa_header[7] = 0x00;
}
skb->protocol = htons(ETH_P_EDSA);
skb->dev = p->parent->master_netdev;
dev_queue_xmit(skb);
return NETDEV_TX_OK;
out_free:
kfree_skb(skb);
return NETDEV_TX_OK;
}
static int edsa_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
struct dsa_switch *ds = dev->dsa_ptr;
u8 *edsa_header;
int source_port;
if (unlikely(ds == NULL))
goto out_drop;
skb = skb_unshare(skb, GFP_ATOMIC);
if (skb == NULL)
goto out;
if (unlikely(!pskb_may_pull(skb, EDSA_HLEN)))
goto out_drop;
/*
* Skip the two null bytes after the ethertype.
*/
edsa_header = skb->data + 2;
/*
* Check that frame type is either TO_CPU or FORWARD, and
* that the source device is zero.
*/
if ((edsa_header[0] & 0xdf) != 0x00 && (edsa_header[0] & 0xdf) != 0xc0)
goto out_drop;
/*
* Check that the source port is a registered DSA port.
*/
source_port = (edsa_header[1] >> 3) & 0x1f;
if (source_port >= DSA_MAX_PORTS || ds->ports[source_port] == NULL)
goto out_drop;
/*
* If the 'tagged' bit is set, convert the DSA tag to a 802.1q
* tag and delete the ethertype part. If the 'tagged' bit is
* clear, delete the ethertype and the DSA tag parts.
*/
if (edsa_header[0] & 0x20) {
u8 new_header[4];
/*
* Insert 802.1q ethertype and copy the VLAN-related
* fields, but clear the bit that will hold CFI (since
* DSA uses that bit location for another purpose).
*/
new_header[0] = (ETH_P_8021Q >> 8) & 0xff;
new_header[1] = ETH_P_8021Q & 0xff;
new_header[2] = edsa_header[2] & ~0x10;
new_header[3] = edsa_header[3];
/*
* Move CFI bit from its place in the DSA header to
* its 802.1q-designated place.
*/
if (edsa_header[1] & 0x01)
new_header[2] |= 0x10;
skb_pull_rcsum(skb, DSA_HLEN);
/*
* Update packet checksum if skb is CHECKSUM_COMPLETE.
*/
if (skb->ip_summed == CHECKSUM_COMPLETE) {
__wsum c = skb->csum;
c = csum_add(c, csum_partial(new_header + 2, 2, 0));
c = csum_sub(c, csum_partial(edsa_header + 2, 2, 0));
skb->csum = c;
}
memcpy(edsa_header, new_header, DSA_HLEN);
memmove(skb->data - ETH_HLEN,
skb->data - ETH_HLEN - DSA_HLEN,
2 * ETH_ALEN);
} else {
/*
* Remove DSA tag and update checksum.
*/
skb_pull_rcsum(skb, EDSA_HLEN);
memmove(skb->data - ETH_HLEN,
skb->data - ETH_HLEN - EDSA_HLEN,
2 * ETH_ALEN);
}
skb->dev = ds->ports[source_port];
skb_push(skb, ETH_HLEN);
skb->protocol = eth_type_trans(skb, skb->dev);
skb->dev->last_rx = jiffies;
skb->dev->stats.rx_packets++;
skb->dev->stats.rx_bytes += skb->len;
netif_receive_skb(skb);
return 0;
out_drop:
kfree_skb(skb);
out:
return 0;
}
static struct packet_type edsa_packet_type = {
.type = __constant_htons(ETH_P_EDSA),
.func = edsa_rcv,
};
static int __init edsa_init_module(void)
{
dev_add_pack(&edsa_packet_type);
return 0;
}
module_init(edsa_init_module);
static void __exit edsa_cleanup_module(void)
{
dev_remove_pack(&edsa_packet_type);
}
module_exit(edsa_cleanup_module);