/* [<][>][^][v][top][bottom][index][help] */
DEFINITIONS
This source file includes following definitions.
- setup_node_to_cpumask_map
- setup_per_cpu_maps
- setup_cpu_pda_map
- setup_cpu_pda_map
- setup_cpu_pda_map
- setup_per_cpu_areas
- setup_node_to_cpumask_map
- numa_set_node
- numa_clear_node
- numa_add_cpu
- numa_remove_cpu
- numa_set_cpumask
- numa_add_cpu
- numa_remove_cpu
- cpu_to_node
- early_cpu_to_node
- _node_to_cpumask_ptr
- node_to_cpumask
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/percpu.h>
#include <linux/kexec.h>
#include <linux/crash_dump.h>
#include <asm/smp.h>
#include <asm/percpu.h>
#include <asm/sections.h>
#include <asm/processor.h>
#include <asm/setup.h>
#include <asm/topology.h>
#include <asm/mpspec.h>
#include <asm/apicdef.h>
#include <asm/highmem.h>
#ifdef CONFIG_X86_LOCAL_APIC
unsigned int num_processors;
unsigned disabled_cpus __cpuinitdata;
/* Processor that is doing the boot up */
unsigned int boot_cpu_physical_apicid = -1U;
unsigned int max_physical_apicid;
EXPORT_SYMBOL(boot_cpu_physical_apicid);
/* Bitmask of physically existing CPUs */
physid_mask_t phys_cpu_present_map;
#endif
/* map cpu index to physical APIC ID */
DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID);
DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
#define X86_64_NUMA 1
/* map cpu index to node index */
DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE);
EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map);
/* which logical CPUs are on which nodes */
cpumask_t *node_to_cpumask_map;
EXPORT_SYMBOL(node_to_cpumask_map);
/* setup node_to_cpumask_map */
static void __init setup_node_to_cpumask_map(void);
#else
static inline void setup_node_to_cpumask_map(void) { }
#endif
#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
/*
* Copy data used in early init routines from the initial arrays to the
* per cpu data areas. These arrays then become expendable and the
* *_early_ptr's are zeroed indicating that the static arrays are gone.
*/
static void __init setup_per_cpu_maps(void)
{
int cpu;
for_each_possible_cpu(cpu) {
per_cpu(x86_cpu_to_apicid, cpu) =
early_per_cpu_map(x86_cpu_to_apicid, cpu);
per_cpu(x86_bios_cpu_apicid, cpu) =
early_per_cpu_map(x86_bios_cpu_apicid, cpu);
#ifdef X86_64_NUMA
per_cpu(x86_cpu_to_node_map, cpu) =
early_per_cpu_map(x86_cpu_to_node_map, cpu);
#endif
}
/* indicate the early static arrays will soon be gone */
early_per_cpu_ptr(x86_cpu_to_apicid) = NULL;
early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL;
#ifdef X86_64_NUMA
early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
#endif
}
#ifdef CONFIG_X86_32
/*
* Great future not-so-futuristic plan: make i386 and x86_64 do it
* the same way
*/
unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(__per_cpu_offset);
static inline void setup_cpu_pda_map(void) { }
#elif !defined(CONFIG_SMP)
static inline void setup_cpu_pda_map(void) { }
#else /* CONFIG_SMP && CONFIG_X86_64 */
/*
* Allocate cpu_pda pointer table and array via alloc_bootmem.
*/
static void __init setup_cpu_pda_map(void)
{
char *pda;
struct x8664_pda **new_cpu_pda;
unsigned long size;
int cpu;
size = roundup(sizeof(struct x8664_pda), cache_line_size());
/* allocate cpu_pda array and pointer table */
{
unsigned long tsize = nr_cpu_ids * sizeof(void *);
unsigned long asize = size * (nr_cpu_ids - 1);
tsize = roundup(tsize, cache_line_size());
new_cpu_pda = alloc_bootmem(tsize + asize);
pda = (char *)new_cpu_pda + tsize;
}
/* initialize pointer table to static pda's */
for_each_possible_cpu(cpu) {
if (cpu == 0) {
/* leave boot cpu pda in place */
new_cpu_pda[0] = cpu_pda(0);
continue;
}
new_cpu_pda[cpu] = (struct x8664_pda *)pda;
new_cpu_pda[cpu]->in_bootmem = 1;
pda += size;
}
/* point to new pointer table */
_cpu_pda = new_cpu_pda;
}
#endif
/*
* Great future plan:
* Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
* Always point %gs to its beginning
*/
void __init setup_per_cpu_areas(void)
{
ssize_t size = PERCPU_ENOUGH_ROOM;
char *ptr;
int cpu;
/* Setup cpu_pda map */
setup_cpu_pda_map();
/* Copy section for each CPU (we discard the original) */
size = PERCPU_ENOUGH_ROOM;
printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n",
size);
for_each_possible_cpu(cpu) {
#ifndef CONFIG_NEED_MULTIPLE_NODES
ptr = alloc_bootmem_pages(size);
#else
int node = early_cpu_to_node(cpu);
if (!node_online(node) || !NODE_DATA(node)) {
ptr = alloc_bootmem_pages(size);
printk(KERN_INFO
"cpu %d has no node %d or node-local memory\n",
cpu, node);
if (ptr)
printk(KERN_DEBUG "per cpu data for cpu%d at %016lx\n",
cpu, __pa(ptr));
}
else {
ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
if (ptr)
printk(KERN_DEBUG "per cpu data for cpu%d on node%d at %016lx\n",
cpu, node, __pa(ptr));
}
#endif
per_cpu_offset(cpu) = ptr - __per_cpu_start;
memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
}
printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d, nr_node_ids %d\n",
NR_CPUS, nr_cpu_ids, nr_node_ids);
/* Setup percpu data maps */
setup_per_cpu_maps();
/* Setup node to cpumask map */
setup_node_to_cpumask_map();
}
#endif
#ifdef X86_64_NUMA
/*
* Allocate node_to_cpumask_map based on number of available nodes
* Requires node_possible_map to be valid.
*
* Note: node_to_cpumask() is not valid until after this is done.
*/
static void __init setup_node_to_cpumask_map(void)
{
unsigned int node, num = 0;
cpumask_t *map;
/* setup nr_node_ids if not done yet */
if (nr_node_ids == MAX_NUMNODES) {
for_each_node_mask(node, node_possible_map)
num = node;
nr_node_ids = num + 1;
}
/* allocate the map */
map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
pr_debug(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
map, nr_node_ids);
/* node_to_cpumask() will now work */
node_to_cpumask_map = map;
}
void __cpuinit numa_set_node(int cpu, int node)
{
int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
if (cpu_pda(cpu) && node != NUMA_NO_NODE)
cpu_pda(cpu)->nodenumber = node;
if (cpu_to_node_map)
cpu_to_node_map[cpu] = node;
else if (per_cpu_offset(cpu))
per_cpu(x86_cpu_to_node_map, cpu) = node;
else
pr_debug("Setting node for non-present cpu %d\n", cpu);
}
void __cpuinit numa_clear_node(int cpu)
{
numa_set_node(cpu, NUMA_NO_NODE);
}
#ifndef CONFIG_DEBUG_PER_CPU_MAPS
void __cpuinit numa_add_cpu(int cpu)
{
cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]);
}
void __cpuinit numa_remove_cpu(int cpu)
{
cpu_clear(cpu, node_to_cpumask_map[cpu_to_node(cpu)]);
}
#else /* CONFIG_DEBUG_PER_CPU_MAPS */
/*
* --------- debug versions of the numa functions ---------
*/
static void __cpuinit numa_set_cpumask(int cpu, int enable)
{
int node = cpu_to_node(cpu);
cpumask_t *mask;
char buf[64];
if (node_to_cpumask_map == NULL) {
printk(KERN_ERR "node_to_cpumask_map NULL\n");
dump_stack();
return;
}
mask = &node_to_cpumask_map[node];
if (enable)
cpu_set(cpu, *mask);
else
cpu_clear(cpu, *mask);
cpulist_scnprintf(buf, sizeof(buf), *mask);
printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
enable? "numa_add_cpu":"numa_remove_cpu", cpu, node, buf);
}
void __cpuinit numa_add_cpu(int cpu)
{
numa_set_cpumask(cpu, 1);
}
void __cpuinit numa_remove_cpu(int cpu)
{
numa_set_cpumask(cpu, 0);
}
int cpu_to_node(int cpu)
{
if (early_per_cpu_ptr(x86_cpu_to_node_map)) {
printk(KERN_WARNING
"cpu_to_node(%d): usage too early!\n", cpu);
dump_stack();
return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
}
return per_cpu(x86_cpu_to_node_map, cpu);
}
EXPORT_SYMBOL(cpu_to_node);
/*
* Same function as cpu_to_node() but used if called before the
* per_cpu areas are setup.
*/
int early_cpu_to_node(int cpu)
{
if (early_per_cpu_ptr(x86_cpu_to_node_map))
return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
if (!per_cpu_offset(cpu)) {
printk(KERN_WARNING
"early_cpu_to_node(%d): no per_cpu area!\n", cpu);
dump_stack();
return NUMA_NO_NODE;
}
return per_cpu(x86_cpu_to_node_map, cpu);
}
/* empty cpumask */
static const cpumask_t cpu_mask_none;
/*
* Returns a pointer to the bitmask of CPUs on Node 'node'.
*/
const cpumask_t *_node_to_cpumask_ptr(int node)
{
if (node_to_cpumask_map == NULL) {
printk(KERN_WARNING
"_node_to_cpumask_ptr(%d): no node_to_cpumask_map!\n",
node);
dump_stack();
return (const cpumask_t *)&cpu_online_map;
}
if (node >= nr_node_ids) {
printk(KERN_WARNING
"_node_to_cpumask_ptr(%d): node > nr_node_ids(%d)\n",
node, nr_node_ids);
dump_stack();
return &cpu_mask_none;
}
return &node_to_cpumask_map[node];
}
EXPORT_SYMBOL(_node_to_cpumask_ptr);
/*
* Returns a bitmask of CPUs on Node 'node'.
*
* Side note: this function creates the returned cpumask on the stack
* so with a high NR_CPUS count, excessive stack space is used. The
* node_to_cpumask_ptr function should be used whenever possible.
*/
cpumask_t node_to_cpumask(int node)
{
if (node_to_cpumask_map == NULL) {
printk(KERN_WARNING
"node_to_cpumask(%d): no node_to_cpumask_map!\n", node);
dump_stack();
return cpu_online_map;
}
if (node >= nr_node_ids) {
printk(KERN_WARNING
"node_to_cpumask(%d): node > nr_node_ids(%d)\n",
node, nr_node_ids);
dump_stack();
return cpu_mask_none;
}
return node_to_cpumask_map[node];
}
EXPORT_SYMBOL(node_to_cpumask);
/*
* --------- end of debug versions of the numa functions ---------
*/
#endif /* CONFIG_DEBUG_PER_CPU_MAPS */
#endif /* X86_64_NUMA */