/* [<][>][^][v][top][bottom][index][help] */
DEFINITIONS
This source file includes following definitions.
- kmmio_page_list
- get_kmmio_probe
- get_kmmio_fault_page
- set_page_present
- arm_kmmio_fault_page
- disarm_kmmio_fault_page
- kmmio_handler
- post_kmmio_handler
- add_kmmio_fault_page
- release_kmmio_fault_page
- register_kmmio_probe
- rcu_free_kmmio_fault_pages
- remove_kmmio_fault_pages
- unregister_kmmio_probe
- kmmio_die_notifier
- init_kmmio
/* Support for MMIO probes.
* Benfit many code from kprobes
* (C) 2002 Louis Zhuang <louis.zhuang@intel.com>.
* 2007 Alexander Eichner
* 2008 Pekka Paalanen <pq@iki.fi>
*/
#include <linux/list.h>
#include <linux/rculist.h>
#include <linux/spinlock.h>
#include <linux/hash.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/uaccess.h>
#include <linux/ptrace.h>
#include <linux/preempt.h>
#include <linux/percpu.h>
#include <linux/kdebug.h>
#include <linux/mutex.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <linux/errno.h>
#include <asm/debugreg.h>
#include <linux/mmiotrace.h>
#define KMMIO_PAGE_HASH_BITS 4
#define KMMIO_PAGE_TABLE_SIZE (1 << KMMIO_PAGE_HASH_BITS)
struct kmmio_fault_page {
struct list_head list;
struct kmmio_fault_page *release_next;
unsigned long page; /* location of the fault page */
/*
* Number of times this page has been registered as a part
* of a probe. If zero, page is disarmed and this may be freed.
* Used only by writers (RCU).
*/
int count;
};
struct kmmio_delayed_release {
struct rcu_head rcu;
struct kmmio_fault_page *release_list;
};
struct kmmio_context {
struct kmmio_fault_page *fpage;
struct kmmio_probe *probe;
unsigned long saved_flags;
unsigned long addr;
int active;
};
static DEFINE_SPINLOCK(kmmio_lock);
/* Protected by kmmio_lock */
unsigned int kmmio_count;
/* Read-protected by RCU, write-protected by kmmio_lock. */
static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE];
static LIST_HEAD(kmmio_probes);
static struct list_head *kmmio_page_list(unsigned long page)
{
return &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)];
}
/* Accessed per-cpu */
static DEFINE_PER_CPU(struct kmmio_context, kmmio_ctx);
/*
* this is basically a dynamic stabbing problem:
* Could use the existing prio tree code or
* Possible better implementations:
* The Interval Skip List: A Data Structure for Finding All Intervals That
* Overlap a Point (might be simple)
* Space Efficient Dynamic Stabbing with Fast Queries - Mikkel Thorup
*/
/* Get the kmmio at this addr (if any). You must be holding RCU read lock. */
static struct kmmio_probe *get_kmmio_probe(unsigned long addr)
{
struct kmmio_probe *p;
list_for_each_entry_rcu(p, &kmmio_probes, list) {
if (addr >= p->addr && addr <= (p->addr + p->len))
return p;
}
return NULL;
}
/* You must be holding RCU read lock. */
static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page)
{
struct list_head *head;
struct kmmio_fault_page *p;
page &= PAGE_MASK;
head = kmmio_page_list(page);
list_for_each_entry_rcu(p, head, list) {
if (p->page == page)
return p;
}
return NULL;
}
static void set_page_present(unsigned long addr, bool present,
unsigned int *pglevel)
{
pteval_t pteval;
pmdval_t pmdval;
unsigned int level;
pmd_t *pmd;
pte_t *pte = lookup_address(addr, &level);
if (!pte) {
pr_err("kmmio: no pte for page 0x%08lx\n", addr);
return;
}
if (pglevel)
*pglevel = level;
switch (level) {
case PG_LEVEL_2M:
pmd = (pmd_t *)pte;
pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT;
if (present)
pmdval |= _PAGE_PRESENT;
set_pmd(pmd, __pmd(pmdval));
break;
case PG_LEVEL_4K:
pteval = pte_val(*pte) & ~_PAGE_PRESENT;
if (present)
pteval |= _PAGE_PRESENT;
set_pte_atomic(pte, __pte(pteval));
break;
default:
pr_err("kmmio: unexpected page level 0x%x.\n", level);
return;
}
__flush_tlb_one(addr);
}
/** Mark the given page as not present. Access to it will trigger a fault. */
static void arm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
{
set_page_present(page & PAGE_MASK, false, pglevel);
}
/** Mark the given page as present. */
static void disarm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
{
set_page_present(page & PAGE_MASK, true, pglevel);
}
/*
* This is being called from do_page_fault().
*
* We may be in an interrupt or a critical section. Also prefecthing may
* trigger a page fault. We may be in the middle of process switch.
* We cannot take any locks, because we could be executing especially
* within a kmmio critical section.
*
* Local interrupts are disabled, so preemption cannot happen.
* Do not enable interrupts, do not sleep, and watch out for other CPUs.
*/
/*
* Interrupts are disabled on entry as trap3 is an interrupt gate
* and they remain disabled thorough out this function.
*/
int kmmio_handler(struct pt_regs *regs, unsigned long addr)
{
struct kmmio_context *ctx;
struct kmmio_fault_page *faultpage;
int ret = 0; /* default to fault not handled */
/*
* Preemption is now disabled to prevent process switch during
* single stepping. We can only handle one active kmmio trace
* per cpu, so ensure that we finish it before something else
* gets to run. We also hold the RCU read lock over single
* stepping to avoid looking up the probe and kmmio_fault_page
* again.
*/
preempt_disable();
rcu_read_lock();
faultpage = get_kmmio_fault_page(addr);
if (!faultpage) {
/*
* Either this page fault is not caused by kmmio, or
* another CPU just pulled the kmmio probe from under
* our feet. The latter case should not be possible.
*/
goto no_kmmio;
}
ctx = &get_cpu_var(kmmio_ctx);
if (ctx->active) {
disarm_kmmio_fault_page(faultpage->page, NULL);
if (addr == ctx->addr) {
/*
* On SMP we sometimes get recursive probe hits on the
* same address. Context is already saved, fall out.
*/
pr_debug("kmmio: duplicate probe hit on CPU %d, for "
"address 0x%08lx.\n",
smp_processor_id(), addr);
ret = 1;
goto no_kmmio_ctx;
}
/*
* Prevent overwriting already in-flight context.
* This should not happen, let's hope disarming at least
* prevents a panic.
*/
pr_emerg("kmmio: recursive probe hit on CPU %d, "
"for address 0x%08lx. Ignoring.\n",
smp_processor_id(), addr);
pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
ctx->addr);
goto no_kmmio_ctx;
}
ctx->active++;
ctx->fpage = faultpage;
ctx->probe = get_kmmio_probe(addr);
ctx->saved_flags = (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF));
ctx->addr = addr;
if (ctx->probe && ctx->probe->pre_handler)
ctx->probe->pre_handler(ctx->probe, regs, addr);
/*
* Enable single-stepping and disable interrupts for the faulting
* context. Local interrupts must not get enabled during stepping.
*/
regs->flags |= X86_EFLAGS_TF;
regs->flags &= ~X86_EFLAGS_IF;
/* Now we set present bit in PTE and single step. */
disarm_kmmio_fault_page(ctx->fpage->page, NULL);
/*
* If another cpu accesses the same page while we are stepping,
* the access will not be caught. It will simply succeed and the
* only downside is we lose the event. If this becomes a problem,
* the user should drop to single cpu before tracing.
*/
put_cpu_var(kmmio_ctx);
return 1; /* fault handled */
no_kmmio_ctx:
put_cpu_var(kmmio_ctx);
no_kmmio:
rcu_read_unlock();
preempt_enable_no_resched();
return ret;
}
/*
* Interrupts are disabled on entry as trap1 is an interrupt gate
* and they remain disabled thorough out this function.
* This must always get called as the pair to kmmio_handler().
*/
static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs)
{
int ret = 0;
struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx);
if (!ctx->active) {
pr_debug("kmmio: spurious debug trap on CPU %d.\n",
smp_processor_id());
goto out;
}
if (ctx->probe && ctx->probe->post_handler)
ctx->probe->post_handler(ctx->probe, condition, regs);
arm_kmmio_fault_page(ctx->fpage->page, NULL);
regs->flags &= ~X86_EFLAGS_TF;
regs->flags |= ctx->saved_flags;
/* These were acquired in kmmio_handler(). */
ctx->active--;
BUG_ON(ctx->active);
rcu_read_unlock();
preempt_enable_no_resched();
/*
* if somebody else is singlestepping across a probe point, flags
* will have TF set, in which case, continue the remaining processing
* of do_debug, as if this is not a probe hit.
*/
if (!(regs->flags & X86_EFLAGS_TF))
ret = 1;
out:
put_cpu_var(kmmio_ctx);
return ret;
}
/* You must be holding kmmio_lock. */
static int add_kmmio_fault_page(unsigned long page)
{
struct kmmio_fault_page *f;
page &= PAGE_MASK;
f = get_kmmio_fault_page(page);
if (f) {
if (!f->count)
arm_kmmio_fault_page(f->page, NULL);
f->count++;
return 0;
}
f = kmalloc(sizeof(*f), GFP_ATOMIC);
if (!f)
return -1;
f->count = 1;
f->page = page;
list_add_rcu(&f->list, kmmio_page_list(f->page));
arm_kmmio_fault_page(f->page, NULL);
return 0;
}
/* You must be holding kmmio_lock. */
static void release_kmmio_fault_page(unsigned long page,
struct kmmio_fault_page **release_list)
{
struct kmmio_fault_page *f;
page &= PAGE_MASK;
f = get_kmmio_fault_page(page);
if (!f)
return;
f->count--;
BUG_ON(f->count < 0);
if (!f->count) {
disarm_kmmio_fault_page(f->page, NULL);
f->release_next = *release_list;
*release_list = f;
}
}
/*
* With page-unaligned ioremaps, one or two armed pages may contain
* addresses from outside the intended mapping. Events for these addresses
* are currently silently dropped. The events may result only from programming
* mistakes by accessing addresses before the beginning or past the end of a
* mapping.
*/
int register_kmmio_probe(struct kmmio_probe *p)
{
unsigned long flags;
int ret = 0;
unsigned long size = 0;
const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK);
spin_lock_irqsave(&kmmio_lock, flags);
if (get_kmmio_probe(p->addr)) {
ret = -EEXIST;
goto out;
}
kmmio_count++;
list_add_rcu(&p->list, &kmmio_probes);
while (size < size_lim) {
if (add_kmmio_fault_page(p->addr + size))
pr_err("kmmio: Unable to set page fault.\n");
size += PAGE_SIZE;
}
out:
spin_unlock_irqrestore(&kmmio_lock, flags);
/*
* XXX: What should I do here?
* Here was a call to global_flush_tlb(), but it does not exist
* anymore. It seems it's not needed after all.
*/
return ret;
}
EXPORT_SYMBOL(register_kmmio_probe);
static void rcu_free_kmmio_fault_pages(struct rcu_head *head)
{
struct kmmio_delayed_release *dr = container_of(
head,
struct kmmio_delayed_release,
rcu);
struct kmmio_fault_page *p = dr->release_list;
while (p) {
struct kmmio_fault_page *next = p->release_next;
BUG_ON(p->count);
kfree(p);
p = next;
}
kfree(dr);
}
static void remove_kmmio_fault_pages(struct rcu_head *head)
{
struct kmmio_delayed_release *dr = container_of(
head,
struct kmmio_delayed_release,
rcu);
struct kmmio_fault_page *p = dr->release_list;
struct kmmio_fault_page **prevp = &dr->release_list;
unsigned long flags;
spin_lock_irqsave(&kmmio_lock, flags);
while (p) {
if (!p->count)
list_del_rcu(&p->list);
else
*prevp = p->release_next;
prevp = &p->release_next;
p = p->release_next;
}
spin_unlock_irqrestore(&kmmio_lock, flags);
/* This is the real RCU destroy call. */
call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages);
}
/*
* Remove a kmmio probe. You have to synchronize_rcu() before you can be
* sure that the callbacks will not be called anymore. Only after that
* you may actually release your struct kmmio_probe.
*
* Unregistering a kmmio fault page has three steps:
* 1. release_kmmio_fault_page()
* Disarm the page, wait a grace period to let all faults finish.
* 2. remove_kmmio_fault_pages()
* Remove the pages from kmmio_page_table.
* 3. rcu_free_kmmio_fault_pages()
* Actally free the kmmio_fault_page structs as with RCU.
*/
void unregister_kmmio_probe(struct kmmio_probe *p)
{
unsigned long flags;
unsigned long size = 0;
const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK);
struct kmmio_fault_page *release_list = NULL;
struct kmmio_delayed_release *drelease;
spin_lock_irqsave(&kmmio_lock, flags);
while (size < size_lim) {
release_kmmio_fault_page(p->addr + size, &release_list);
size += PAGE_SIZE;
}
list_del_rcu(&p->list);
kmmio_count--;
spin_unlock_irqrestore(&kmmio_lock, flags);
drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC);
if (!drelease) {
pr_crit("kmmio: leaking kmmio_fault_page objects.\n");
return;
}
drelease->release_list = release_list;
/*
* This is not really RCU here. We have just disarmed a set of
* pages so that they cannot trigger page faults anymore. However,
* we cannot remove the pages from kmmio_page_table,
* because a probe hit might be in flight on another CPU. The
* pages are collected into a list, and they will be removed from
* kmmio_page_table when it is certain that no probe hit related to
* these pages can be in flight. RCU grace period sounds like a
* good choice.
*
* If we removed the pages too early, kmmio page fault handler might
* not find the respective kmmio_fault_page and determine it's not
* a kmmio fault, when it actually is. This would lead to madness.
*/
call_rcu(&drelease->rcu, remove_kmmio_fault_pages);
}
EXPORT_SYMBOL(unregister_kmmio_probe);
static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val,
void *args)
{
struct die_args *arg = args;
if (val == DIE_DEBUG && (arg->err & DR_STEP))
if (post_kmmio_handler(arg->err, arg->regs) == 1)
return NOTIFY_STOP;
return NOTIFY_DONE;
}
static struct notifier_block nb_die = {
.notifier_call = kmmio_die_notifier
};
static int __init init_kmmio(void)
{
int i;
for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++)
INIT_LIST_HEAD(&kmmio_page_table[i]);
return register_die_notifier(&nb_die);
}
fs_initcall(init_kmmio); /* should be before device_initcall() */