root/arch/x86/oprofile/op_model_ppro.c

DEFINITIONS

1. ppro_fill_in_addresses
2. ppro_setup_ctrs
3. ppro_check_ctrs
4. ppro_start
5. ppro_stop
6. ppro_shutdown

/*
 * @file op_model_ppro.h
 * pentium pro / P6 model-specific MSR operations
 *
 * @remark Copyright 2002 OProfile authors
 * @remark Read the file COPYING
 *
 * @author John Levon
 * @author Philippe Elie
 * @author Graydon Hoare
 */

#include <linux/oprofile.h>
#include <asm/ptrace.h>
#include <asm/msr.h>
#include <asm/apic.h>
#include <asm/nmi.h>

#include "op_x86_model.h"
#include "op_counter.h"

#define NUM_COUNTERS 2
#define NUM_CONTROLS 2

#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
#define CTR_32BIT_WRITE(l, msrs, c)     \
        do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0); } while (0)
#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))

#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
#define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
#define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
#define CTRL_CLEAR(x) (x &= (1<<21))
#define CTRL_SET_ENABLE(val) (val |= 1<<20)
#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
#define CTRL_SET_UM(val, m) (val |= (m << 8))
#define CTRL_SET_EVENT(val, e) (val |= e)

static unsigned long reset_value[NUM_COUNTERS];

static void ppro_fill_in_addresses(struct op_msrs * const msrs)
{
        int i;

        for (i = 0; i < NUM_COUNTERS; i++) {
                if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
                        msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
                else
                        msrs->counters[i].addr = 0;
        }

        for (i = 0; i < NUM_CONTROLS; i++) {
                if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
                        msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
                else
                        msrs->controls[i].addr = 0;
        }
}


static void ppro_setup_ctrs(struct op_msrs const * const msrs)
{
        unsigned int low, high;
        int i;

        /* clear all counters */
        for (i = 0 ; i < NUM_CONTROLS; ++i) {
                if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
                        continue;
                CTRL_READ(low, high, msrs, i);
                CTRL_CLEAR(low);
                CTRL_WRITE(low, high, msrs, i);
        }

        /* avoid a false detection of ctr overflows in NMI handler */
        for (i = 0; i < NUM_COUNTERS; ++i) {
                if (unlikely(!CTR_IS_RESERVED(msrs, i)))
                        continue;
                CTR_32BIT_WRITE(1, msrs, i);
        }

        /* enable active counters */
        for (i = 0; i < NUM_COUNTERS; ++i) {
                if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
                        reset_value[i] = counter_config[i].count;

                        CTR_32BIT_WRITE(counter_config[i].count, msrs, i);

                        CTRL_READ(low, high, msrs, i);
                        CTRL_CLEAR(low);
                        CTRL_SET_ENABLE(low);
                        CTRL_SET_USR(low, counter_config[i].user);
                        CTRL_SET_KERN(low, counter_config[i].kernel);
                        CTRL_SET_UM(low, counter_config[i].unit_mask);
                        CTRL_SET_EVENT(low, counter_config[i].event);
                        CTRL_WRITE(low, high, msrs, i);
                } else {
                        reset_value[i] = 0;
                }
        }
}


static int ppro_check_ctrs(struct pt_regs * const regs,
                           struct op_msrs const * const msrs)
{
        unsigned int low, high;
        int i;

        for (i = 0 ; i < NUM_COUNTERS; ++i) {
                if (!reset_value[i])
                        continue;
                CTR_READ(low, high, msrs, i);
                if (CTR_OVERFLOWED(low)) {
                        oprofile_add_sample(regs, i);
                        CTR_32BIT_WRITE(reset_value[i], msrs, i);
                }
        }

        /* Only P6 based Pentium M need to re-unmask the apic vector but it
         * doesn't hurt other P6 variant */
        apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);

        /* We can't work out if we really handled an interrupt. We
         * might have caught a *second* counter just after overflowing
         * the interrupt for this counter then arrives
         * and we don't find a counter that's overflowed, so we
         * would return 0 and get dazed + confused. Instead we always
         * assume we found an overflow. This sucks.
         */
        return 1;
}


static void ppro_start(struct op_msrs const * const msrs)
{
        unsigned int low, high;
        int i;

        for (i = 0; i < NUM_COUNTERS; ++i) {
                if (reset_value[i]) {
                        CTRL_READ(low, high, msrs, i);
                        CTRL_SET_ACTIVE(low);
                        CTRL_WRITE(low, high, msrs, i);
                }
        }
}


static void ppro_stop(struct op_msrs const * const msrs)
{
        unsigned int low, high;
        int i;

        for (i = 0; i < NUM_COUNTERS; ++i) {
                if (!reset_value[i])
                        continue;
                CTRL_READ(low, high, msrs, i);
                CTRL_SET_INACTIVE(low);
                CTRL_WRITE(low, high, msrs, i);
        }
}

static void ppro_shutdown(struct op_msrs const * const msrs)
{
        int i;

        for (i = 0 ; i < NUM_COUNTERS ; ++i) {
                if (CTR_IS_RESERVED(msrs, i))
                        release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
        }
        for (i = 0 ; i < NUM_CONTROLS ; ++i) {
                if (CTRL_IS_RESERVED(msrs, i))
                        release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
        }
}


struct op_x86_model_spec const op_ppro_spec = {
        .num_counters = NUM_COUNTERS,
        .num_controls = NUM_CONTROLS,
        .fill_in_addresses = &ppro_fill_in_addresses,
        .setup_ctrs = &ppro_setup_ctrs,
        .check_ctrs = &ppro_check_ctrs,
        .start = &ppro_start,
        .stop = &ppro_stop,
        .shutdown = &ppro_shutdown
};