root/sound/isa/opti9xx/miro.h

INCLUDED FROM

#ifndef _MIRO_H_
#define _MIRO_H_

#define ACI_REG_COMMAND         0       /* write register offset */
#define ACI_REG_STATUS          1       /* read register offset */
#define ACI_REG_BUSY            2       /* busy register offset */
#define ACI_REG_RDS             2       /* PCM20: RDS register offset */
#define ACI_MINTIME             500     /* ACI time out limit */

#define ACI_SET_MUTE            0x0d
#define ACI_SET_POWERAMP        0x0f
#define ACI_SET_TUNERMUTE       0xa3
#define ACI_SET_TUNERMONO       0xa4
#define ACI_SET_IDE             0xd0
#define ACI_SET_WSS             0xd1
#define ACI_SET_SOLOMODE        0xd2
#define ACI_SET_PREAMP          0x03
#define ACI_GET_PREAMP          0x21
#define ACI_WRITE_TUNE          0xa7
#define ACI_READ_TUNERSTEREO    0xa8
#define ACI_READ_TUNERSTATION   0xa9
#define ACI_READ_VERSION        0xf1
#define ACI_READ_IDCODE         0xf2
#define ACI_INIT                0xff
#define ACI_STATUS              0xf0
#define ACI_S_GENERAL           0x00
#define ACI_ERROR_OP            0xdf

/* ACI Mixer */

/* These are the values for the right channel GET registers.
   Add an offset of 0x01 for the left channel register.
   (left=right+0x01) */

#define ACI_GET_MASTER          0x03
#define ACI_GET_MIC             0x05
#define ACI_GET_LINE            0x07
#define ACI_GET_CD              0x09
#define ACI_GET_SYNTH           0x0b
#define ACI_GET_PCM             0x0d
#define ACI_GET_LINE1           0x10    /* Radio on PCM20 */
#define ACI_GET_LINE2           0x12

#define ACI_GET_EQ1             0x22    /* from Bass ... */
#define ACI_GET_EQ2             0x24
#define ACI_GET_EQ3             0x26
#define ACI_GET_EQ4             0x28
#define ACI_GET_EQ5             0x2a
#define ACI_GET_EQ6             0x2c
#define ACI_GET_EQ7             0x2e    /* ... to Treble */

/* And these are the values for the right channel SET registers.
   For left channel access you have to add an offset of 0x08.
   MASTER is an exception, which needs an offset of 0x01 */

#define ACI_SET_MASTER          0x00
#define ACI_SET_MIC             0x30
#define ACI_SET_LINE            0x31
#define ACI_SET_CD              0x34
#define ACI_SET_SYNTH           0x33
#define ACI_SET_PCM             0x32
#define ACI_SET_LINE1           0x35    /* Radio on PCM20 */
#define ACI_SET_LINE2           0x36

#define ACI_SET_EQ1             0x40    /* from Bass ... */
#define ACI_SET_EQ2             0x41
#define ACI_SET_EQ3             0x42
#define ACI_SET_EQ4             0x43
#define ACI_SET_EQ5             0x44
#define ACI_SET_EQ6             0x45
#define ACI_SET_EQ7             0x46    /* ... to Treble */

#endif  /* _MIRO_H_ */