root/sound/oss/pas2_midi.c

DEFINITIONS

1. pas_midi_open
2. pas_midi_close
3. dump_to_midi
4. pas_midi_out
5. pas_midi_start_read
6. pas_midi_end_read
7. pas_midi_kick
8. pas_buffer_status
9. pas_midi_init
10. pas_midi_interrupt

/*
 * sound/oss/pas2_midi.c
 *
 * The low level driver for the PAS Midi Interface.
 */
/*
 * Copyright (C) by Hannu Savolainen 1993-1997
 *
 * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
 * Version 2 (June 1991). See the "COPYING" file distributed with this software
 * for more info.
 *
 * Bartlomiej Zolnierkiewicz    : Added __init to pas_init_mixer()
 */

#include <linux/init.h>
#include <linux/spinlock.h>
#include "sound_config.h"

#include "pas2.h"

extern spinlock_t pas_lock;

static int      midi_busy, input_opened;
static int      my_dev;

int pas2_mididev=-1;

static unsigned char tmp_queue[256];
static volatile int qlen;
static volatile unsigned char qhead, qtail;

static void     (*midi_input_intr) (int dev, unsigned char data);

static int pas_midi_open(int dev, int mode,
              void            (*input) (int dev, unsigned char data),
              void            (*output) (int dev)
)
{
        int             err;
        unsigned long   flags;
        unsigned char   ctrl;


        if (midi_busy)
                return -EBUSY;

        /*
         * Reset input and output FIFO pointers
         */
        pas_write(0x20 | 0x40,
                  0x178b);

        spin_lock_irqsave(&pas_lock, flags);

        if ((err = pas_set_intr(0x10)) < 0)
        {
                spin_unlock_irqrestore(&pas_lock, flags);
                return err;
        }
        /*
         * Enable input available and output FIFO empty interrupts
         */

        ctrl = 0;
        input_opened = 0;
        midi_input_intr = input;

        if (mode == OPEN_READ || mode == OPEN_READWRITE)
        {
                ctrl |= 0x04;   /* Enable input */
                input_opened = 1;
        }
        if (mode == OPEN_WRITE || mode == OPEN_READWRITE)
        {
                ctrl |= 0x08 | 0x10;    /* Enable output */
        }
        pas_write(ctrl, 0x178b);

        /*
         * Acknowledge any pending interrupts
         */

        pas_write(0xff, 0x1B88);

        spin_unlock_irqrestore(&pas_lock, flags);

        midi_busy = 1;
        qlen = qhead = qtail = 0;
        return 0;
}

static void pas_midi_close(int dev)
{

        /*
         * Reset FIFO pointers, disable intrs
         */
        pas_write(0x20 | 0x40, 0x178b);

        pas_remove_intr(0x10);
        midi_busy = 0;
}

static int dump_to_midi(unsigned char midi_byte)
{
        int fifo_space, x;

        fifo_space = ((x = pas_read(0x1B89)) >> 4) & 0x0f;

        /*
         * The MIDI FIFO space register and it's documentation is nonunderstandable.
         * There seem to be no way to differentiate between buffer full and buffer
         * empty situations. For this reason we don't never write the buffer
         * completely full. In this way we can assume that 0 (or is it 15)
         * means that the buffer is empty.
         */

        if (fifo_space < 2 && fifo_space != 0)  /* Full (almost) */
                return 0;       /* Ask upper layers to retry after some time */

        pas_write(midi_byte, 0x178A);

        return 1;
}

static int pas_midi_out(int dev, unsigned char midi_byte)
{

        unsigned long flags;

        /*
         * Drain the local queue first
         */

        spin_lock_irqsave(&pas_lock, flags);

        while (qlen && dump_to_midi(tmp_queue[qhead]))
        {
                qlen--;
                qhead++;
        }

        spin_unlock_irqrestore(&pas_lock, flags);

        /*
         *      Output the byte if the local queue is empty.
         */

        if (!qlen)
                if (dump_to_midi(midi_byte))
                        return 1;

        /*
         *      Put to the local queue
         */

        if (qlen >= 256)
                return 0;       /* Local queue full */

        spin_lock_irqsave(&pas_lock, flags);

        tmp_queue[qtail] = midi_byte;
        qlen++;
        qtail++;

        spin_unlock_irqrestore(&pas_lock, flags);

        return 1;
}

static int pas_midi_start_read(int dev)
{
        return 0;
}

static int pas_midi_end_read(int dev)
{
        return 0;
}

static void pas_midi_kick(int dev)
{
}

static int pas_buffer_status(int dev)
{
        return qlen;
}

#define MIDI_SYNTH_NAME "Pro Audio Spectrum Midi"
#define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT
#include "midi_synth.h"

static struct midi_operations pas_midi_operations =
{
        .owner          = THIS_MODULE,
        .info           = {"Pro Audio Spectrum", 0, 0, SNDCARD_PAS},
        .converter      = &std_midi_synth,
        .in_info        = {0},
        .open           = pas_midi_open,
        .close          = pas_midi_close,
        .outputc        = pas_midi_out,
        .start_read     = pas_midi_start_read,
        .end_read       = pas_midi_end_read,
        .kick           = pas_midi_kick,
        .buffer_status  = pas_buffer_status,
};

void __init pas_midi_init(void)
{
        int dev = sound_alloc_mididev();

        if (dev == -1)
        {
                printk(KERN_WARNING "pas_midi_init: Too many midi devices detected\n");
                return;
        }
        std_midi_synth.midi_dev = my_dev = dev;
        midi_devs[dev] = &pas_midi_operations;
        pas2_mididev = dev;
        sequencer_init();
}

void pas_midi_interrupt(void)
{
        unsigned char   stat;
        int             i, incount;

        stat = pas_read(0x1B88);

        if (stat & 0x04)        /* Input data available */
        {
                incount = pas_read(0x1B89) & 0x0f;      /* Input FIFO size */
                if (!incount)
                        incount = 16;

                for (i = 0; i < incount; i++)
                        if (input_opened)
                        {
                                midi_input_intr(my_dev, pas_read(0x178A));
                        } else
                                pas_read(0x178A);       /* Flush */
        }
        if (stat & (0x08 | 0x10))
        {
                spin_lock(&pas_lock);/* called in irq context */

                while (qlen && dump_to_midi(tmp_queue[qhead]))
                {
                        qlen--;
                        qhead++;
                }

                spin_unlock(&pas_lock);
        }
        if (stat & 0x40)
        {
                printk(KERN_WARNING "MIDI output overrun %x,%x\n", pas_read(0x1B89), stat);
        }
        pas_write(stat, 0x1B88);        /* Acknowledge interrupts */
}