/* [<][>][^][v][top][bottom][index][help] */
DEFINITIONS
This source file includes following definitions.
- dummy_unuse
- dummy_input
- dummy_free
- create_port
- register_client
- delete_client
- alsa_seq_dummy_init
- alsa_seq_dummy_exit
/*
* ALSA sequencer MIDI-through client
* Copyright (c) 1999-2000 by Takashi Iwai <tiwai@suse.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include "seq_clientmgr.h"
#include <sound/initval.h>
#include <sound/asoundef.h>
/*
Sequencer MIDI-through client
This gives a simple midi-through client. All the normal input events
are redirected to output port immediately.
The routing can be done via aconnect program in alsa-utils.
Each client has a static client number 62 (= SNDRV_SEQ_CLIENT_DUMMY).
If you want to auto-load this module, you may add the following alias
in your /etc/conf.modules file.
alias snd-seq-client-62 snd-seq-dummy
The module is loaded on demand for client 62, or /proc/asound/seq/
is accessed. If you don't need this module to be loaded, alias
snd-seq-client-62 as "off". This will help modprobe.
The number of ports to be created can be specified via the module
parameter "ports". For example, to create four ports, add the
following option in /etc/modprobe.conf:
option snd-seq-dummy ports=4
The modle option "duplex=1" enables duplex operation to the port.
In duplex mode, a pair of ports are created instead of single port,
and events are tunneled between pair-ports. For example, input to
port A is sent to output port of another port B and vice versa.
In duplex mode, each port has DUPLEX capability.
*/
MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
MODULE_DESCRIPTION("ALSA sequencer MIDI-through client");
MODULE_LICENSE("GPL");
MODULE_ALIAS("snd-seq-client-" __stringify(SNDRV_SEQ_CLIENT_DUMMY));
static int ports = 1;
static int duplex;
module_param(ports, int, 0444);
MODULE_PARM_DESC(ports, "number of ports to be created");
module_param(duplex, bool, 0444);
MODULE_PARM_DESC(duplex, "create DUPLEX ports");
struct snd_seq_dummy_port {
int client;
int port;
int duplex;
int connect;
};
static int my_client = -1;
/*
* unuse callback - send ALL_SOUNDS_OFF and RESET_CONTROLLERS events
* to subscribers.
* Note: this callback is called only after all subscribers are removed.
*/
static int
dummy_unuse(void *private_data, struct snd_seq_port_subscribe *info)
{
struct snd_seq_dummy_port *p;
int i;
struct snd_seq_event ev;
p = private_data;
memset(&ev, 0, sizeof(ev));
if (p->duplex)
ev.source.port = p->connect;
else
ev.source.port = p->port;
ev.dest.client = SNDRV_SEQ_ADDRESS_SUBSCRIBERS;
ev.type = SNDRV_SEQ_EVENT_CONTROLLER;
for (i = 0; i < 16; i++) {
ev.data.control.channel = i;
ev.data.control.param = MIDI_CTL_ALL_SOUNDS_OFF;
snd_seq_kernel_client_dispatch(p->client, &ev, 0, 0);
ev.data.control.param = MIDI_CTL_RESET_CONTROLLERS;
snd_seq_kernel_client_dispatch(p->client, &ev, 0, 0);
}
return 0;
}
/*
* event input callback - just redirect events to subscribers
*/
static int
dummy_input(struct snd_seq_event *ev, int direct, void *private_data,
int atomic, int hop)
{
struct snd_seq_dummy_port *p;
struct snd_seq_event tmpev;
p = private_data;
if (ev->source.client == SNDRV_SEQ_CLIENT_SYSTEM ||
ev->type == SNDRV_SEQ_EVENT_KERNEL_ERROR)
return 0; /* ignore system messages */
tmpev = *ev;
if (p->duplex)
tmpev.source.port = p->connect;
else
tmpev.source.port = p->port;
tmpev.dest.client = SNDRV_SEQ_ADDRESS_SUBSCRIBERS;
return snd_seq_kernel_client_dispatch(p->client, &tmpev, atomic, hop);
}
/*
* free_private callback
*/
static void
dummy_free(void *private_data)
{
kfree(private_data);
}
/*
* create a port
*/
static struct snd_seq_dummy_port __init *
create_port(int idx, int type)
{
struct snd_seq_port_info pinfo;
struct snd_seq_port_callback pcb;
struct snd_seq_dummy_port *rec;
if ((rec = kzalloc(sizeof(*rec), GFP_KERNEL)) == NULL)
return NULL;
rec->client = my_client;
rec->duplex = duplex;
rec->connect = 0;
memset(&pinfo, 0, sizeof(pinfo));
pinfo.addr.client = my_client;
if (duplex)
sprintf(pinfo.name, "Midi Through Port-%d:%c", idx,
(type ? 'B' : 'A'));
else
sprintf(pinfo.name, "Midi Through Port-%d", idx);
pinfo.capability = SNDRV_SEQ_PORT_CAP_READ | SNDRV_SEQ_PORT_CAP_SUBS_READ;
pinfo.capability |= SNDRV_SEQ_PORT_CAP_WRITE | SNDRV_SEQ_PORT_CAP_SUBS_WRITE;
if (duplex)
pinfo.capability |= SNDRV_SEQ_PORT_CAP_DUPLEX;
pinfo.type = SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC
| SNDRV_SEQ_PORT_TYPE_SOFTWARE
| SNDRV_SEQ_PORT_TYPE_PORT;
memset(&pcb, 0, sizeof(pcb));
pcb.owner = THIS_MODULE;
pcb.unuse = dummy_unuse;
pcb.event_input = dummy_input;
pcb.private_free = dummy_free;
pcb.private_data = rec;
pinfo.kernel = &pcb;
if (snd_seq_kernel_client_ctl(my_client, SNDRV_SEQ_IOCTL_CREATE_PORT, &pinfo) < 0) {
kfree(rec);
return NULL;
}
rec->port = pinfo.addr.port;
return rec;
}
/*
* register client and create ports
*/
static int __init
register_client(void)
{
struct snd_seq_dummy_port *rec1, *rec2;
int i;
if (ports < 1) {
snd_printk(KERN_ERR "invalid number of ports %d\n", ports);
return -EINVAL;
}
/* create client */
my_client = snd_seq_create_kernel_client(NULL, SNDRV_SEQ_CLIENT_DUMMY,
"Midi Through");
if (my_client < 0)
return my_client;
/* create ports */
for (i = 0; i < ports; i++) {
rec1 = create_port(i, 0);
if (rec1 == NULL) {
snd_seq_delete_kernel_client(my_client);
return -ENOMEM;
}
if (duplex) {
rec2 = create_port(i, 1);
if (rec2 == NULL) {
snd_seq_delete_kernel_client(my_client);
return -ENOMEM;
}
rec1->connect = rec2->port;
rec2->connect = rec1->port;
}
}
return 0;
}
/*
* delete client if exists
*/
static void __exit
delete_client(void)
{
if (my_client >= 0)
snd_seq_delete_kernel_client(my_client);
}
/*
* Init part
*/
static int __init alsa_seq_dummy_init(void)
{
int err;
snd_seq_autoload_lock();
err = register_client();
snd_seq_autoload_unlock();
return err;
}
static void __exit alsa_seq_dummy_exit(void)
{
delete_client();
}
module_init(alsa_seq_dummy_init)
module_exit(alsa_seq_dummy_exit)