[funini.com] -> [kei@sodan] -> Kernel Reading

root/sound/pci/mixart/mixart_hwdep.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. mixart_wait_nice_for_register_value
  2. mixart_load_elf
  3. mixart_enum_connectors
  4. mixart_enum_physio
  5. mixart_first_init
  6. mixart_dsp_load
  7. snd_mixart_setup_firmware
  8. mixart_hwdep_open
  9. mixart_hwdep_release
  10. mixart_hwdep_dsp_status
  11. mixart_hwdep_dsp_load
  12. snd_mixart_setup_firmware

/*
 * Driver for Digigram miXart soundcards
 *
 * DSP firmware management
 *
 * Copyright (c) 2003 by Digigram <alsa@digigram.com>
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; either version 2 of the License, or
 *   (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU General Public License for more details.
 *
 *   You should have received a copy of the GNU General Public License
 *   along with this program; if not, write to the Free Software
 *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */

#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/firmware.h>
#include <linux/vmalloc.h>
#include <asm/io.h>
#include <sound/core.h>
#include "mixart.h"
#include "mixart_mixer.h"
#include "mixart_core.h"
#include "mixart_hwdep.h"


/**
 * wait for a value on a peudo register, exit with a timeout
 *
 * @param mgr pointer to miXart manager structure
 * @param offset unsigned pseudo_register base + offset of value
 * @param value value
 * @param timeout timeout in centisenconds
 */
static int mixart_wait_nice_for_register_value(struct mixart_mgr *mgr,
                                               u32 offset, int is_egal,
                                               u32 value, unsigned long timeout)
{
        unsigned long end_time = jiffies + (timeout * HZ / 100);
        u32 read;

        do {    /* we may take too long time in this loop.
                 * so give controls back to kernel if needed.
                 */
                cond_resched();

                read = readl_be( MIXART_MEM( mgr, offset ));
                if(is_egal) {
                        if(read == value) return 0;
                }
                else { /* wait for different value */
                        if(read != value) return 0;
                }
        } while ( time_after_eq(end_time, jiffies) );

        return -EBUSY;
}


/*
  structures needed to upload elf code packets 
 */
struct snd_mixart_elf32_ehdr {
        u8      e_ident[16];
        u16     e_type;
        u16     e_machine;
        u32     e_version;
        u32     e_entry;
        u32     e_phoff;
        u32     e_shoff;
        u32     e_flags;
        u16     e_ehsize;
        u16     e_phentsize;
        u16     e_phnum;
        u16     e_shentsize;
        u16     e_shnum;
        u16     e_shstrndx;
};

struct snd_mixart_elf32_phdr {
        u32     p_type;
        u32     p_offset;
        u32     p_vaddr;
        u32     p_paddr;
        u32     p_filesz;
        u32     p_memsz;
        u32     p_flags;
        u32     p_align;
};

static int mixart_load_elf(struct mixart_mgr *mgr, const struct firmware *dsp )
{
        char                    elf32_magic_number[4] = {0x7f,'E','L','F'};
        struct snd_mixart_elf32_ehdr *elf_header;
        int                     i;

        elf_header = (struct snd_mixart_elf32_ehdr *)dsp->data;
        for( i=0; i<4; i++ )
                if ( elf32_magic_number[i] != elf_header->e_ident[i] )
                        return -EINVAL;

        if( elf_header->e_phoff != 0 ) {
                struct snd_mixart_elf32_phdr     elf_programheader;

                for( i=0; i < be16_to_cpu(elf_header->e_phnum); i++ ) {
                        u32 pos = be32_to_cpu(elf_header->e_phoff) + (u32)(i * be16_to_cpu(elf_header->e_phentsize));

                        memcpy( &elf_programheader, dsp->data + pos, sizeof(elf_programheader) );

                        if(elf_programheader.p_type != 0) {
                                if( elf_programheader.p_filesz != 0 ) {
                                        memcpy_toio( MIXART_MEM( mgr, be32_to_cpu(elf_programheader.p_vaddr)),
                                                     dsp->data + be32_to_cpu( elf_programheader.p_offset ),
                                                     be32_to_cpu( elf_programheader.p_filesz ));
                                }
                        }
                }
        }
        return 0;
}

/*
 * get basic information and init miXart
 */

/* audio IDs for request to the board */
#define MIXART_FIRST_ANA_AUDIO_ID       0
#define MIXART_FIRST_DIG_AUDIO_ID       8

static int mixart_enum_connectors(struct mixart_mgr *mgr)
{
        u32 k;
        int err;
        struct mixart_msg request;
        struct mixart_enum_connector_resp *connector;
        struct mixart_audio_info_req  *audio_info_req;
        struct mixart_audio_info_resp *audio_info;

        connector = kmalloc(sizeof(*connector), GFP_KERNEL);
        audio_info_req = kmalloc(sizeof(*audio_info_req), GFP_KERNEL);
        audio_info = kmalloc(sizeof(*audio_info), GFP_KERNEL);
        if (! connector || ! audio_info_req || ! audio_info) {
                err = -ENOMEM;
                goto __error;
        }

        audio_info_req->line_max_level = MIXART_FLOAT_P_22_0_TO_HEX;
        audio_info_req->micro_max_level = MIXART_FLOAT_M_20_0_TO_HEX;
        audio_info_req->cd_max_level = MIXART_FLOAT____0_0_TO_HEX;

        request.message_id = MSG_SYSTEM_ENUM_PLAY_CONNECTOR;
        request.uid = (struct mixart_uid){0,0};  /* board num = 0 */
        request.data = NULL;
        request.size = 0;

        err = snd_mixart_send_msg(mgr, &request, sizeof(*connector), connector);
        if((err < 0) || (connector->error_code) || (connector->uid_count > MIXART_MAX_PHYS_CONNECTORS)) {
                snd_printk(KERN_ERR "error MSG_SYSTEM_ENUM_PLAY_CONNECTOR\n");
                err = -EINVAL;
                goto __error;
        }

        for(k=0; k < connector->uid_count; k++) {
                struct mixart_pipe *pipe;

                if(k < MIXART_FIRST_DIG_AUDIO_ID) {
                        pipe = &mgr->chip[k/2]->pipe_out_ana;
                } else {
                        pipe = &mgr->chip[(k-MIXART_FIRST_DIG_AUDIO_ID)/2]->pipe_out_dig;
                }
                if(k & 1) {
                        pipe->uid_right_connector = connector->uid[k];   /* odd */
                } else {
                        pipe->uid_left_connector = connector->uid[k];    /* even */
                }

                /* snd_printk(KERN_DEBUG "playback connector[%d].object_id = %x\n", k, connector->uid[k].object_id); */

                /* TODO: really need send_msg MSG_CONNECTOR_GET_AUDIO_INFO for each connector ? perhaps for analog level caps ? */
                request.message_id = MSG_CONNECTOR_GET_AUDIO_INFO;
                request.uid = connector->uid[k];
                request.data = audio_info_req;
                request.size = sizeof(*audio_info_req);

                err = snd_mixart_send_msg(mgr, &request, sizeof(*audio_info), audio_info);
                if( err < 0 ) {
                        snd_printk(KERN_ERR "error MSG_CONNECTOR_GET_AUDIO_INFO\n");
                        goto __error;
                }
                /*snd_printk(KERN_DEBUG "play  analog_info.analog_level_present = %x\n", audio_info->info.analog_info.analog_level_present);*/
        }

        request.message_id = MSG_SYSTEM_ENUM_RECORD_CONNECTOR;
        request.uid = (struct mixart_uid){0,0};  /* board num = 0 */
        request.data = NULL;
        request.size = 0;

        err = snd_mixart_send_msg(mgr, &request, sizeof(*connector), connector);
        if((err < 0) || (connector->error_code) || (connector->uid_count > MIXART_MAX_PHYS_CONNECTORS)) {
                snd_printk(KERN_ERR "error MSG_SYSTEM_ENUM_RECORD_CONNECTOR\n");
                err = -EINVAL;
                goto __error;
        }

        for(k=0; k < connector->uid_count; k++) {
                struct mixart_pipe *pipe;

                if(k < MIXART_FIRST_DIG_AUDIO_ID) {
                        pipe = &mgr->chip[k/2]->pipe_in_ana;
                } else {
                        pipe = &mgr->chip[(k-MIXART_FIRST_DIG_AUDIO_ID)/2]->pipe_in_dig;
                }
                if(k & 1) {
                        pipe->uid_right_connector = connector->uid[k];   /* odd */
                } else {
                        pipe->uid_left_connector = connector->uid[k];    /* even */
                }

                /* snd_printk(KERN_DEBUG "capture connector[%d].object_id = %x\n", k, connector->uid[k].object_id); */

                /* TODO: really need send_msg MSG_CONNECTOR_GET_AUDIO_INFO for each connector ? perhaps for analog level caps ? */
                request.message_id = MSG_CONNECTOR_GET_AUDIO_INFO;
                request.uid = connector->uid[k];
                request.data = audio_info_req;
                request.size = sizeof(*audio_info_req);

                err = snd_mixart_send_msg(mgr, &request, sizeof(*audio_info), audio_info);
                if( err < 0 ) {
                        snd_printk(KERN_ERR "error MSG_CONNECTOR_GET_AUDIO_INFO\n");
                        goto __error;
                }
                /*snd_printk(KERN_DEBUG "rec  analog_info.analog_level_present = %x\n", audio_info->info.analog_info.analog_level_present);*/
        }
        err = 0;

 __error:
        kfree(connector);
        kfree(audio_info_req);
        kfree(audio_info);

        return err;
}

static int mixart_enum_physio(struct mixart_mgr *mgr)
{
        u32 k;
        int err;
        struct mixart_msg request;
        struct mixart_uid get_console_mgr;
        struct mixart_return_uid console_mgr;
        struct mixart_uid_enumeration phys_io;

        /* get the uid for the console manager */
        get_console_mgr.object_id = 0;
        get_console_mgr.desc = MSG_CONSOLE_MANAGER | 0; /* cardindex = 0 */

        request.message_id = MSG_CONSOLE_GET_CLOCK_UID;
        request.uid = get_console_mgr;
        request.data = &get_console_mgr;
        request.size = sizeof(get_console_mgr);

        err = snd_mixart_send_msg(mgr, &request, sizeof(console_mgr), &console_mgr);

        if( (err < 0) || (console_mgr.error_code != 0) ) {
                snd_printk(KERN_DEBUG "error MSG_CONSOLE_GET_CLOCK_UID : err=%x\n", console_mgr.error_code);
                return -EINVAL;
        }

        /* used later for clock issues ! */
        mgr->uid_console_manager = console_mgr.uid;

        request.message_id = MSG_SYSTEM_ENUM_PHYSICAL_IO;
        request.uid = (struct mixart_uid){0,0};
        request.data = &console_mgr.uid;
        request.size = sizeof(console_mgr.uid);

        err = snd_mixart_send_msg(mgr, &request, sizeof(phys_io), &phys_io);
        if( (err < 0) || ( phys_io.error_code != 0 ) ) {
                snd_printk(KERN_ERR "error MSG_SYSTEM_ENUM_PHYSICAL_IO err(%x) error_code(%x)\n", err, phys_io.error_code );
                return -EINVAL;
        }

        /* min 2 phys io per card (analog in + analog out) */
        if (phys_io.nb_uid < MIXART_MAX_CARDS * 2)
                return -EINVAL;

        for(k=0; k<mgr->num_cards; k++) {
                mgr->chip[k]->uid_in_analog_physio = phys_io.uid[k];
                mgr->chip[k]->uid_out_analog_physio = phys_io.uid[phys_io.nb_uid/2 + k]; 
        }

        return 0;
}


static int mixart_first_init(struct mixart_mgr *mgr)
{
        u32 k;
        int err;
        struct mixart_msg request;

        if((err = mixart_enum_connectors(mgr)) < 0) return err;

        if((err = mixart_enum_physio(mgr)) < 0) return err;

        /* send a synchro command to card (necessary to do this before first MSG_STREAM_START_STREAM_GRP_PACKET) */
        /* though why not here */
        request.message_id = MSG_SYSTEM_SEND_SYNCHRO_CMD;
        request.uid = (struct mixart_uid){0,0};
        request.data = NULL;
        request.size = 0;
        /* this command has no data. response is a 32 bit status */
        err = snd_mixart_send_msg(mgr, &request, sizeof(k), &k);
        if( (err < 0) || (k != 0) ) {
                snd_printk(KERN_ERR "error MSG_SYSTEM_SEND_SYNCHRO_CMD\n");
                return err == 0 ? -EINVAL : err;
        }

        return 0;
}


/* firmware base addresses (when hard coded) */
#define MIXART_MOTHERBOARD_XLX_BASE_ADDRESS   0x00600000

static int mixart_dsp_load(struct mixart_mgr* mgr, int index, const struct firmware *dsp)
{
        int           err, card_index;
        u32           status_xilinx, status_elf, status_daught;
        u32           val;

        /* read motherboard xilinx status */
        status_xilinx = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_MXLX_STATUS_OFFSET ));
        /* read elf status */
        status_elf = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_ELF_STATUS_OFFSET ));
        /* read daughterboard xilinx status */
        status_daught = readl_be( MIXART_MEM( mgr,MIXART_PSEUDOREG_DXLX_STATUS_OFFSET ));

        /* motherboard xilinx status 5 will say that the board is performing a reset */
        if( status_xilinx == 5 ) {
                snd_printk( KERN_ERR "miXart is resetting !\n");
                return -EAGAIN; /* try again later */
        }

        switch (index)   {
        case MIXART_MOTHERBOARD_XLX_INDEX:

                /* xilinx already loaded ? */ 
                if( status_xilinx == 4 ) {
                        snd_printk( KERN_DEBUG "xilinx is already loaded !\n");
                        return 0;
                }
                /* the status should be 0 == "idle" */
                if( status_xilinx != 0 ) {
                        snd_printk( KERN_ERR "xilinx load error ! status = %d\n", status_xilinx);
                        return -EIO; /* modprob -r may help ? */
                }

                /* check xilinx validity */
                if (((u32*)(dsp->data))[0] == 0xffffffff)
                        return -EINVAL;
                if (dsp->size % 4)
                        return -EINVAL;

                /* set xilinx status to copying */
                writel_be( 1, MIXART_MEM( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET ));

                /* setup xilinx base address */
                writel_be( MIXART_MOTHERBOARD_XLX_BASE_ADDRESS, MIXART_MEM( mgr,MIXART_PSEUDOREG_MXLX_BASE_ADDR_OFFSET ));
                /* setup code size for xilinx file */
                writel_be( dsp->size, MIXART_MEM( mgr, MIXART_PSEUDOREG_MXLX_SIZE_OFFSET ));

                /* copy xilinx code */
                memcpy_toio(  MIXART_MEM( mgr, MIXART_MOTHERBOARD_XLX_BASE_ADDRESS),  dsp->data,  dsp->size);
    
                /* set xilinx status to copy finished */
                writel_be( 2, MIXART_MEM( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET ));

                /* return, because no further processing needed */
                return 0;

        case MIXART_MOTHERBOARD_ELF_INDEX:

                if( status_elf == 4 ) {
                        snd_printk( KERN_DEBUG "elf file already loaded !\n");
                        return 0;
                }

                /* the status should be 0 == "idle" */
                if( status_elf != 0 ) {
                        snd_printk( KERN_ERR "elf load error ! status = %d\n", status_elf);
                        return -EIO; /* modprob -r may help ? */
                }

                /* wait for xilinx status == 4 */
                err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_MXLX_STATUS_OFFSET, 1, 4, 500); /* 5sec */
                if (err < 0) {
                        snd_printk( KERN_ERR "xilinx was not loaded or could not be started\n");
                        return err;
                }

                /* init some data on the card */
                writel_be( 0, MIXART_MEM( mgr, MIXART_PSEUDOREG_BOARDNUMBER ) ); /* set miXart boardnumber to 0 */
                writel_be( 0, MIXART_MEM( mgr, MIXART_FLOWTABLE_PTR ) );         /* reset pointer to flow table on miXart */

                /* set elf status to copying */
                writel_be( 1, MIXART_MEM( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET ));

                /* process the copying of the elf packets */
                err = mixart_load_elf( mgr, dsp );
                if (err < 0) return err;

                /* set elf status to copy finished */
                writel_be( 2, MIXART_MEM( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET ));

                /* wait for elf status == 4 */
                err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_ELF_STATUS_OFFSET, 1, 4, 300); /* 3sec */
                if (err < 0) {
                        snd_printk( KERN_ERR "elf could not be started\n");
                        return err;
                }

                /* miXart waits at this point on the pointer to the flow table */
                writel_be( (u32)mgr->flowinfo.addr, MIXART_MEM( mgr, MIXART_FLOWTABLE_PTR ) ); /* give pointer of flow table to miXart */

                return 0;  /* return, another xilinx file has to be loaded before */

        case MIXART_AESEBUBOARD_XLX_INDEX:
        default:

                /* elf and xilinx should be loaded */
                if( (status_elf != 4) || (status_xilinx != 4) ) {
                        printk( KERN_ERR "xilinx or elf not successfully loaded\n");
                        return -EIO; /* modprob -r may help ? */
                }

                /* wait for daughter detection != 0 */
                err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DBRD_PRESENCE_OFFSET, 0, 0, 30); /* 300msec */
                if (err < 0) {
                        snd_printk( KERN_ERR "error starting elf file\n");
                        return err;
                }

                /* the board type can now be retrieved */
                mgr->board_type = (DAUGHTER_TYPE_MASK & readl_be( MIXART_MEM( mgr, MIXART_PSEUDOREG_DBRD_TYPE_OFFSET)));

                if (mgr->board_type == MIXART_DAUGHTER_TYPE_NONE)
                        break;  /* no daughter board; the file does not have to be loaded, continue after the switch */

                /* only if aesebu daughter board presence (elf code must run)  */ 
                if (mgr->board_type != MIXART_DAUGHTER_TYPE_AES )
                        return -EINVAL;

                /* daughter should be idle */
                if( status_daught != 0 ) {
                        printk( KERN_ERR "daughter load error ! status = %d\n", status_daught);
                        return -EIO; /* modprob -r may help ? */
                }
 
                /* check daughterboard xilinx validity */
                if (((u32*)(dsp->data))[0] == 0xffffffff)
                        return -EINVAL;
                if (dsp->size % 4)
                        return -EINVAL;

                /* inform mixart about the size of the file */
                writel_be( dsp->size, MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_SIZE_OFFSET ));

                /* set daughterboard status to 1 */
                writel_be( 1, MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET ));

                /* wait for status == 2 */
                err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET, 1, 2, 30); /* 300msec */
                if (err < 0) {
                        snd_printk( KERN_ERR "daughter board load error\n");
                        return err;
                }

                /* get the address where to write the file */
                val = readl_be( MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_BASE_ADDR_OFFSET ));
                if (!val)
                        return -EINVAL;

                /* copy daughterboard xilinx code */
                memcpy_toio(  MIXART_MEM( mgr, val),  dsp->data,  dsp->size);

                /* set daughterboard status to 4 */
                writel_be( 4, MIXART_MEM( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET ));

                /* continue with init */
                break;
        } /* end of switch file index*/

        /* wait for daughter status == 3 */
        err = mixart_wait_nice_for_register_value( mgr, MIXART_PSEUDOREG_DXLX_STATUS_OFFSET, 1, 3, 300); /* 3sec */
        if (err < 0) {
                snd_printk( KERN_ERR "daughter board could not be initialised\n");
                return err;
        }

        /* init mailbox (communication with embedded) */
        snd_mixart_init_mailbox(mgr);

        /* first communication with embedded */
        err = mixart_first_init(mgr);
        if (err < 0) {
                snd_printk( KERN_ERR "miXart could not be set up\n");
                return err;
        }

        /* create devices and mixer in accordance with HW options*/
        for (card_index = 0; card_index < mgr->num_cards; card_index++) {
                struct snd_mixart *chip = mgr->chip[card_index];

                if ((err = snd_mixart_create_pcm(chip)) < 0)
                        return err;

                if (card_index == 0) {
                        if ((err = snd_mixart_create_mixer(chip->mgr)) < 0)
                                return err;
                }

                if ((err = snd_card_register(chip->card)) < 0)
                        return err;
        };

        snd_printdd("miXart firmware downloaded and successfully set up\n");

        return 0;
}


#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
#if !defined(CONFIG_USE_MIXARTLOADER) && !defined(CONFIG_SND_MIXART) /* built-in kernel */
#define SND_MIXART_FW_LOADER    /* use the standard firmware loader */
#endif
#endif

#ifdef SND_MIXART_FW_LOADER

int snd_mixart_setup_firmware(struct mixart_mgr *mgr)
{
        static char *fw_files[3] = {
                "miXart8.xlx", "miXart8.elf", "miXart8AES.xlx"
        };
        char path[32];

        const struct firmware *fw_entry;
        int i, err;

        for (i = 0; i < 3; i++) {
                sprintf(path, "mixart/%s", fw_files[i]);
                if (request_firmware(&fw_entry, path, &mgr->pci->dev)) {
                        snd_printk(KERN_ERR "miXart: can't load firmware %s\n", path);
                        return -ENOENT;
                }
                /* fake hwdep dsp record */
                err = mixart_dsp_load(mgr, i, fw_entry);
                release_firmware(fw_entry);
                if (err < 0)
                        return err;
                mgr->dsp_loaded |= 1 << i;
        }
        return 0;
}

MODULE_FIRMWARE("mixart/miXart8.xlx");
MODULE_FIRMWARE("mixart/miXart8.elf");
MODULE_FIRMWARE("mixart/miXart8AES.xlx");

#else /* old style firmware loading */

/* miXart hwdep interface id string */
#define SND_MIXART_HWDEP_ID       "miXart Loader"

static int mixart_hwdep_open(struct snd_hwdep *hw, struct file *file)
{
        return 0;
}

static int mixart_hwdep_release(struct snd_hwdep *hw, struct file *file)
{
        return 0;
}

static int mixart_hwdep_dsp_status(struct snd_hwdep *hw,
                                   struct snd_hwdep_dsp_status *info)
{
        struct mixart_mgr *mgr = hw->private_data;

        strcpy(info->id, "miXart");
        info->num_dsps = MIXART_HARDW_FILES_MAX_INDEX;

        if (mgr->dsp_loaded & (1 <<  MIXART_MOTHERBOARD_ELF_INDEX))
                info->chip_ready = 1;

        info->version = MIXART_DRIVER_VERSION;
        return 0;
}

static int mixart_hwdep_dsp_load(struct snd_hwdep *hw,
                                 struct snd_hwdep_dsp_image *dsp)
{
        struct mixart_mgr* mgr = hw->private_data;
        struct firmware fw;
        int err;

        fw.size = dsp->length;
        fw.data = vmalloc(dsp->length);
        if (! fw.data) {
                snd_printk(KERN_ERR "miXart: cannot allocate image size %d\n",
                           (int)dsp->length);
                return -ENOMEM;
        }
        if (copy_from_user((void *) fw.data, dsp->image, dsp->length)) {
                vfree(fw.data);
                return -EFAULT;
        }
        err = mixart_dsp_load(mgr, dsp->index, &fw);
        vfree(fw.data);
        if (err < 0)
                return err;
        mgr->dsp_loaded |= 1 << dsp->index;
        return err;
}

int snd_mixart_setup_firmware(struct mixart_mgr *mgr)
{
        int err;
        struct snd_hwdep *hw;

        /* only create hwdep interface for first cardX (see "index" module parameter)*/
        if ((err = snd_hwdep_new(mgr->chip[0]->card, SND_MIXART_HWDEP_ID, 0, &hw)) < 0)
                return err;

        hw->iface = SNDRV_HWDEP_IFACE_MIXART;
        hw->private_data = mgr;
        hw->ops.open = mixart_hwdep_open;
        hw->ops.release = mixart_hwdep_release;
        hw->ops.dsp_status = mixart_hwdep_dsp_status;
        hw->ops.dsp_load = mixart_hwdep_dsp_load;
        hw->exclusive = 1;
        sprintf(hw->name,  SND_MIXART_HWDEP_ID);
        mgr->dsp_loaded = 0;

        return snd_card_register(mgr->chip[0]->card);
}

#endif /* SND_MIXART_FW_LOADER */

/* [<][>][^][v][top][bottom][index][help] */

[funini.com] -> [kei@sodan] -> Kernel Reading