root/include/asm-x86/sync_bitops.h

DEFINITIONS

1. sync_set_bit
2. sync_clear_bit
3. sync_change_bit
4. sync_test_and_set_bit
5. sync_test_and_clear_bit
6. sync_test_and_change_bit

#ifndef ASM_X86__SYNC_BITOPS_H
#define ASM_X86__SYNC_BITOPS_H

/*
 * Copyright 1992, Linus Torvalds.
 */

/*
 * These have to be done with inline assembly: that way the bit-setting
 * is guaranteed to be atomic. All bit operations return 0 if the bit
 * was cleared before the operation and != 0 if it was not.
 *
 * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
 */

#define ADDR (*(volatile long *)addr)

/**
 * sync_set_bit - Atomically set a bit in memory
 * @nr: the bit to set
 * @addr: the address to start counting from
 *
 * This function is atomic and may not be reordered.  See __set_bit()
 * if you do not require the atomic guarantees.
 *
 * Note that @nr may be almost arbitrarily large; this function is not
 * restricted to acting on a single-word quantity.
 */
static inline void sync_set_bit(int nr, volatile unsigned long *addr)
{
        asm volatile("lock; btsl %1,%0"
                     : "+m" (ADDR)
                     : "Ir" (nr)
                     : "memory");
}

/**
 * sync_clear_bit - Clears a bit in memory
 * @nr: Bit to clear
 * @addr: Address to start counting from
 *
 * sync_clear_bit() is atomic and may not be reordered.  However, it does
 * not contain a memory barrier, so if it is used for locking purposes,
 * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
 * in order to ensure changes are visible on other processors.
 */
static inline void sync_clear_bit(int nr, volatile unsigned long *addr)
{
        asm volatile("lock; btrl %1,%0"
                     : "+m" (ADDR)
                     : "Ir" (nr)
                     : "memory");
}

/**
 * sync_change_bit - Toggle a bit in memory
 * @nr: Bit to change
 * @addr: Address to start counting from
 *
 * sync_change_bit() is atomic and may not be reordered.
 * Note that @nr may be almost arbitrarily large; this function is not
 * restricted to acting on a single-word quantity.
 */
static inline void sync_change_bit(int nr, volatile unsigned long *addr)
{
        asm volatile("lock; btcl %1,%0"
                     : "+m" (ADDR)
                     : "Ir" (nr)
                     : "memory");
}

/**
 * sync_test_and_set_bit - Set a bit and return its old value
 * @nr: Bit to set
 * @addr: Address to count from
 *
 * This operation is atomic and cannot be reordered.
 * It also implies a memory barrier.
 */
static inline int sync_test_and_set_bit(int nr, volatile unsigned long *addr)
{
        int oldbit;

        asm volatile("lock; btsl %2,%1\n\tsbbl %0,%0"
                     : "=r" (oldbit), "+m" (ADDR)
                     : "Ir" (nr) : "memory");
        return oldbit;
}

/**
 * sync_test_and_clear_bit - Clear a bit and return its old value
 * @nr: Bit to clear
 * @addr: Address to count from
 *
 * This operation is atomic and cannot be reordered.
 * It also implies a memory barrier.
 */
static inline int sync_test_and_clear_bit(int nr, volatile unsigned long *addr)
{
        int oldbit;

        asm volatile("lock; btrl %2,%1\n\tsbbl %0,%0"
                     : "=r" (oldbit), "+m" (ADDR)
                     : "Ir" (nr) : "memory");
        return oldbit;
}

/**
 * sync_test_and_change_bit - Change a bit and return its old value
 * @nr: Bit to change
 * @addr: Address to count from
 *
 * This operation is atomic and cannot be reordered.
 * It also implies a memory barrier.
 */
static inline int sync_test_and_change_bit(int nr, volatile unsigned long *addr)
{
        int oldbit;

        asm volatile("lock; btcl %2,%1\n\tsbbl %0,%0"
                     : "=r" (oldbit), "+m" (ADDR)
                     : "Ir" (nr) : "memory");
        return oldbit;
}

#define sync_test_bit(nr, addr) test_bit(nr, addr)

#undef ADDR

#endif /* ASM_X86__SYNC_BITOPS_H */