[funini.com] -> [kei@sodan] -> Kernel Reading

root/include/scsi/scsi_transport_spi.h

/* [<][>][^][v][top][bottom][index][help] */
/* 
 *  Parallel SCSI (SPI) transport specific attributes exported to sysfs.
 *
 *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
#ifndef SCSI_TRANSPORT_SPI_H
#define SCSI_TRANSPORT_SPI_H

#include <linux/transport_class.h>
#include <linux/mutex.h>

struct scsi_transport_template;
struct scsi_target;
struct scsi_device;
struct Scsi_Host;

struct spi_transport_attrs {
        int period;             /* value in the PPR/SDTR command */
        int min_period;
        int offset;
        int max_offset;
        unsigned int width:1;   /* 0 - narrow, 1 - wide */
        unsigned int max_width:1;
        unsigned int iu:1;      /* Information Units enabled */
        unsigned int dt:1;      /* DT clocking enabled */
        unsigned int qas:1;     /* Quick Arbitration and Selection enabled */
        unsigned int wr_flow:1; /* Write Flow control enabled */
        unsigned int rd_strm:1; /* Read streaming enabled */
        unsigned int rti:1;     /* Retain Training Information */
        unsigned int pcomp_en:1;/* Precompensation enabled */
        unsigned int hold_mcs:1;/* Hold Margin Control Settings */
        unsigned int initial_dv:1; /* DV done to this target yet  */
        unsigned long flags;    /* flags field for drivers to use */
        /* Device Properties fields */
        unsigned int support_sync:1; /* synchronous support */
        unsigned int support_wide:1; /* wide support */
        unsigned int support_dt:1; /* allows DT phases */
        unsigned int support_dt_only; /* disallows ST phases */
        unsigned int support_ius; /* support Information Units */
        unsigned int support_qas; /* supports quick arbitration and selection */
        /* Private Fields */
        unsigned int dv_pending:1; /* Internal flag: DV Requested */
        unsigned int dv_in_progress:1;  /* Internal: DV started */
        struct mutex dv_mutex; /* semaphore to serialise dv */
};

enum spi_signal_type {
        SPI_SIGNAL_UNKNOWN = 1,
        SPI_SIGNAL_SE,
        SPI_SIGNAL_LVD,
        SPI_SIGNAL_HVD,
};

struct spi_host_attrs {
        enum spi_signal_type signalling;
};

/* accessor functions */
#define spi_period(x)   (((struct spi_transport_attrs *)&(x)->starget_data)->period)
#define spi_min_period(x) (((struct spi_transport_attrs *)&(x)->starget_data)->min_period)
#define spi_offset(x)   (((struct spi_transport_attrs *)&(x)->starget_data)->offset)
#define spi_max_offset(x) (((struct spi_transport_attrs *)&(x)->starget_data)->max_offset)
#define spi_width(x)    (((struct spi_transport_attrs *)&(x)->starget_data)->width)
#define spi_max_width(x) (((struct spi_transport_attrs *)&(x)->starget_data)->max_width)
#define spi_iu(x)       (((struct spi_transport_attrs *)&(x)->starget_data)->iu)
#define spi_dt(x)       (((struct spi_transport_attrs *)&(x)->starget_data)->dt)
#define spi_qas(x)      (((struct spi_transport_attrs *)&(x)->starget_data)->qas)
#define spi_wr_flow(x)  (((struct spi_transport_attrs *)&(x)->starget_data)->wr_flow)
#define spi_rd_strm(x)  (((struct spi_transport_attrs *)&(x)->starget_data)->rd_strm)
#define spi_rti(x)      (((struct spi_transport_attrs *)&(x)->starget_data)->rti)
#define spi_pcomp_en(x) (((struct spi_transport_attrs *)&(x)->starget_data)->pcomp_en)
#define spi_hold_mcs(x) (((struct spi_transport_attrs *)&(x)->starget_data)->hold_mcs)
#define spi_initial_dv(x)       (((struct spi_transport_attrs *)&(x)->starget_data)->initial_dv)
#define spi_dv_pending(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_pending)

#define spi_support_sync(x)     (((struct spi_transport_attrs *)&(x)->starget_data)->support_sync)
#define spi_support_wide(x)     (((struct spi_transport_attrs *)&(x)->starget_data)->support_wide)
#define spi_support_dt(x)       (((struct spi_transport_attrs *)&(x)->starget_data)->support_dt)
#define spi_support_dt_only(x)  (((struct spi_transport_attrs *)&(x)->starget_data)->support_dt_only)
#define spi_support_ius(x)      (((struct spi_transport_attrs *)&(x)->starget_data)->support_ius)
#define spi_support_qas(x)      (((struct spi_transport_attrs *)&(x)->starget_data)->support_qas)

#define spi_flags(x)    (((struct spi_transport_attrs *)&(x)->starget_data)->flags)
#define spi_signalling(h)       (((struct spi_host_attrs *)(h)->shost_data)->signalling)



/* The functions by which the transport class and the driver communicate */
struct spi_function_template {
        void    (*get_period)(struct scsi_target *);
        void    (*set_period)(struct scsi_target *, int);
        void    (*get_offset)(struct scsi_target *);
        void    (*set_offset)(struct scsi_target *, int);
        void    (*get_width)(struct scsi_target *);
        void    (*set_width)(struct scsi_target *, int);
        void    (*get_iu)(struct scsi_target *);
        void    (*set_iu)(struct scsi_target *, int);
        void    (*get_dt)(struct scsi_target *);
        void    (*set_dt)(struct scsi_target *, int);
        void    (*get_qas)(struct scsi_target *);
        void    (*set_qas)(struct scsi_target *, int);
        void    (*get_wr_flow)(struct scsi_target *);
        void    (*set_wr_flow)(struct scsi_target *, int);
        void    (*get_rd_strm)(struct scsi_target *);
        void    (*set_rd_strm)(struct scsi_target *, int);
        void    (*get_rti)(struct scsi_target *);
        void    (*set_rti)(struct scsi_target *, int);
        void    (*get_pcomp_en)(struct scsi_target *);
        void    (*set_pcomp_en)(struct scsi_target *, int);
        void    (*get_hold_mcs)(struct scsi_target *);
        void    (*set_hold_mcs)(struct scsi_target *, int);
        void    (*get_signalling)(struct Scsi_Host *);
        void    (*set_signalling)(struct Scsi_Host *, enum spi_signal_type);
        int     (*deny_binding)(struct scsi_target *);
        /* The driver sets these to tell the transport class it
         * wants the attributes displayed in sysfs.  If the show_ flag
         * is not set, the attribute will be private to the transport
         * class */
        unsigned long   show_period:1;
        unsigned long   show_offset:1;
        unsigned long   show_width:1;
        unsigned long   show_iu:1;
        unsigned long   show_dt:1;
        unsigned long   show_qas:1;
        unsigned long   show_wr_flow:1;
        unsigned long   show_rd_strm:1;
        unsigned long   show_rti:1;
        unsigned long   show_pcomp_en:1;
        unsigned long   show_hold_mcs:1;
};

struct scsi_transport_template *spi_attach_transport(struct spi_function_template *);
void spi_release_transport(struct scsi_transport_template *);
void spi_schedule_dv_device(struct scsi_device *);
void spi_dv_device(struct scsi_device *);
void spi_display_xfer_agreement(struct scsi_target *);
int spi_print_msg(const unsigned char *);
int spi_populate_width_msg(unsigned char *msg, int width);
int spi_populate_sync_msg(unsigned char *msg, int period, int offset);
int spi_populate_ppr_msg(unsigned char *msg, int period, int offset, int width,
                int options);

#endif /* SCSI_TRANSPORT_SPI_H */

/* [<][>][^][v][top][bottom][index][help] */

[funini.com] -> [kei@sodan] -> Kernel Reading