[funini.com] -> [kei@sodan] -> Kernel Reading

root/include/asm-m68k/amigayle.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


/*
** asm-m68k/amigayle.h -- This header defines the registers of the gayle chip
**                        found on the Amiga 1200
**                        This information was found by disassembling card.resource,
**                        so the definitions may not be 100% correct
**                        anyone has an official doc ?
**
** Copyright 1997 by Alain Malek
**
** This file is subject to the terms and conditions of the GNU General Public
** License.  See the file COPYING in the main directory of this archive
** for more details.
**
** Created: 11/28/97 by Alain Malek
*/

#ifndef _M68K_AMIGAYLE_H_
#define _M68K_AMIGAYLE_H_

#include <linux/types.h>
#include <asm/amigahw.h>

/* memory layout */

#define GAYLE_RAM               (0x600000+zTwoBase)
#define GAYLE_RAMSIZE           (0x400000)
#define GAYLE_ATTRIBUTE         (0xa00000+zTwoBase)
#define GAYLE_ATTRIBUTESIZE     (0x020000)
#define GAYLE_IO                (0xa20000+zTwoBase)     /* 16bit and even 8bit registers */
#define GAYLE_IOSIZE            (0x010000)
#define GAYLE_IO_8BITODD        (0xa30000+zTwoBase)     /* odd 8bit registers */

/* offset for accessing odd IO registers */
#define GAYLE_ODD               (GAYLE_IO_8BITODD-GAYLE_IO-1)

/* GAYLE registers */

struct GAYLE {
        u_char cardstatus;
        u_char pad0[0x1000-1];

        u_char intreq;
        u_char pad1[0x1000-1];

        u_char inten;
        u_char pad2[0x1000-1];

        u_char config;
        u_char pad3[0x1000-1];
};

#define GAYLE_ADDRESS   (0xda8000)      /* gayle main registers base address */

#define GAYLE_RESET     (0xa40000)      /* write 0x00 to start reset,
                                           read 1 byte to stop reset */

#define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS))
#define gayle_reset (*(volatile u_char *)(zTwoBase+GAYLE_RESET))

#define gayle_attribute ((volatile u_char *)(GAYLE_ATTRIBUTE))

#if 0
#define gayle_inb(a) readb( GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
#define gayle_outb(v,a) writeb( v, GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )

#define gayle_inw(a) readw( GAYLE_IO+(a) )
#define gayle_outw(v,a) writew( v, GAYLE_IO+(a) )
#endif

/* GAYLE_CARDSTATUS bit def */

#define GAYLE_CS_CCDET          0x40    /* credit card detect */
#define GAYLE_CS_BVD1           0x20    /* battery voltage detect 1 */
#define GAYLE_CS_SC             0x20    /* credit card status change */
#define GAYLE_CS_BVD2           0x10    /* battery voltage detect 2 */
#define GAYLE_CS_DA             0x10    /* digital audio */
#define GAYLE_CS_WR             0x08    /* write enable (1 == enabled) */
#define GAYLE_CS_BSY            0x04    /* credit card busy */
#define GAYLE_CS_IRQ            0x04    /* interrupt request */

/* GAYLE_IRQ bit def */

#define GAYLE_IRQ_IDE           0x80
#define GAYLE_IRQ_CCDET         0x40
#define GAYLE_IRQ_BVD1          0x20
#define GAYLE_IRQ_SC            0x20
#define GAYLE_IRQ_BVD2          0x10
#define GAYLE_IRQ_DA            0x10
#define GAYLE_IRQ_WR            0x08
#define GAYLE_IRQ_BSY           0x04
#define GAYLE_IRQ_IRQ           0x04
#define GAYLE_IRQ_IDEACK1       0x02
#define GAYLE_IRQ_IDEACK0       0x01

/* GAYLE_CONFIG bit def
   (bit 0-1 for program voltage, bit 2-3 for access speed */

#define GAYLE_CFG_0V            0x00
#define GAYLE_CFG_5V            0x01
#define GAYLE_CFG_12V           0x02

#define GAYLE_CFG_100NS         0x08
#define GAYLE_CFG_150NS         0x04
#define GAYLE_CFG_250NS         0x00
#define GAYLE_CFG_720NS         0x0c

#endif /* asm-m68k/amigayle.h */

/* [<][>][^][v][top][bottom][index][help] */

[funini.com] -> [kei@sodan] -> Kernel Reading