root/include/asm-x86/mach-default/smpboot_hooks.h

INCLUDED FROM

DEFINITIONS

1. smpboot_clear_io_apic_irqs
2. smpboot_setup_warm_reset_vector
3. smpboot_restore_warm_reset_vector
4. smpboot_setup_io_apic
5. smpboot_clear_io_apic

/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
 * which needs to alter them. */

static inline void smpboot_clear_io_apic_irqs(void)
{
#ifdef CONFIG_X86_IO_APIC
        io_apic_irqs = 0;
#endif
}

static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
{
        CMOS_WRITE(0xa, 0xf);
        local_flush_tlb();
        pr_debug("1.\n");
        *((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
        pr_debug("2.\n");
        *((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
        pr_debug("3.\n");
}

static inline void smpboot_restore_warm_reset_vector(void)
{
        /*
         * Install writable page 0 entry to set BIOS data area.
         */
        local_flush_tlb();

        /*
         * Paranoid:  Set warm reset code and vector here back
         * to default values.
         */
        CMOS_WRITE(0, 0xf);

        *((volatile long *) phys_to_virt(0x467)) = 0;
}

static inline void __init smpboot_setup_io_apic(void)
{
#ifdef CONFIG_X86_IO_APIC
        /*
         * Here we can be sure that there is an IO-APIC in the system. Let's
         * go and set it up:
         */
        if (!skip_ioapic_setup && nr_ioapics)
                setup_IO_APIC();
        else {
                nr_ioapics = 0;
                localise_nmi_watchdog();
        }
#endif
}

static inline void smpboot_clear_io_apic(void)
{
#ifdef CONFIG_X86_IO_APIC
        nr_ioapics = 0;
#endif
}