/* [<][>][^][v][top][bottom][index][help] */
#ifndef _LINUX_FDREG_H
#define _LINUX_FDREG_H
/*
** WD1772 stuff
*/
/* register codes */
#define FDCSELREG_STP (0x80) /* command/status register */
#define FDCSELREG_TRA (0x82) /* track register */
#define FDCSELREG_SEC (0x84) /* sector register */
#define FDCSELREG_DTA (0x86) /* data register */
/* register names for FDC_READ/WRITE macros */
#define FDCREG_CMD 0
#define FDCREG_STATUS 0
#define FDCREG_TRACK 2
#define FDCREG_SECTOR 4
#define FDCREG_DATA 6
/* command opcodes */
#define FDCCMD_RESTORE (0x00) /* - */
#define FDCCMD_SEEK (0x10) /* | */
#define FDCCMD_STEP (0x20) /* | TYP 1 Commands */
#define FDCCMD_STIN (0x40) /* | */
#define FDCCMD_STOT (0x60) /* - */
#define FDCCMD_RDSEC (0x80) /* - TYP 2 Commands */
#define FDCCMD_WRSEC (0xa0) /* - " */
#define FDCCMD_RDADR (0xc0) /* - */
#define FDCCMD_RDTRA (0xe0) /* | TYP 3 Commands */
#define FDCCMD_WRTRA (0xf0) /* - */
#define FDCCMD_FORCI (0xd0) /* - TYP 4 Command */
/* command modifier bits */
#define FDCCMDADD_SR6 (0x00) /* step rate settings */
#define FDCCMDADD_SR12 (0x01)
#define FDCCMDADD_SR2 (0x02)
#define FDCCMDADD_SR3 (0x03)
#define FDCCMDADD_V (0x04) /* verify */
#define FDCCMDADD_H (0x08) /* wait for spin-up */
#define FDCCMDADD_U (0x10) /* update track register */
#define FDCCMDADD_M (0x10) /* multiple sector access */
#define FDCCMDADD_E (0x04) /* head settling flag */
#define FDCCMDADD_P (0x02) /* precompensation off */
#define FDCCMDADD_A0 (0x01) /* DAM flag */
/* status register bits */
#define FDCSTAT_MOTORON (0x80) /* motor on */
#define FDCSTAT_WPROT (0x40) /* write protected (FDCCMD_WR*) */
#define FDCSTAT_SPINUP (0x20) /* motor speed stable (Type I) */
#define FDCSTAT_DELDAM (0x20) /* sector has deleted DAM (Type II+III) */
#define FDCSTAT_RECNF (0x10) /* record not found */
#define FDCSTAT_CRC (0x08) /* CRC error */
#define FDCSTAT_TR00 (0x04) /* Track 00 flag (Type I) */
#define FDCSTAT_LOST (0x04) /* Lost Data (Type II+III) */
#define FDCSTAT_IDX (0x02) /* Index status (Type I) */
#define FDCSTAT_DRQ (0x02) /* DRQ status (Type II+III) */
#define FDCSTAT_BUSY (0x01) /* FDC is busy */
/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1 1 -> Side 2 */
#define DSKSIDE (0x01)
#define DSKDRVNONE (0x06)
#define DSKDRV0 (0x02)
#define DSKDRV1 (0x04)
/* step rates */
#define FDCSTEP_6 0x00
#define FDCSTEP_12 0x01
#define FDCSTEP_2 0x02
#define FDCSTEP_3 0x03
#endif